Introduction
The document introduces the JETvarnish 3D with Inline Embossing and Hot Foil Stamping capabilities, highlighting its ability to enhance production with digital embossing and hot foil stamping.

Specifications

• Production Speed: Up to 1700 B2 sheets per hour or 25 meters per minute.
• Formats: Minimum size of 21 x 30 cm and maximum size of 52 x 105 cm.
• Substrate Thickness: Ranges from 150 gsm (minimum) to 600 gsm (maximum).
• Substrates: Compatible with most matte or glossy laminated surfaces, layered paper, plastic, PVC, and other coated materials.
• Films: Supports most hot and cold foils with an optimization system for film consumption.
• Roll Specifications: Maximum diameter of 30 cm and approximately 2000 meters of film, with a minimum width of 10 cm.
• Hot Foil Stamping: Maximum stamping surface of 51.5 x 68 cm on a 52 x 74 cm size.
• Embossing: Thickness ranges from 6 to 200 microns.
• Compatibility: Connects to all JETvarnish 3D models.
• Dry Air Requirements: 6 bar / 87 PSI, with a minimum of 150 - 200 L/hour.
• Dimensions & Weight: 2.44 x 1.60 x 1.52 meters, weighing 850 kg.
• Electrical Requirements: 30 kW at 400 volts.

Features and Benefits
The iFOIL solution eliminates the need for films, dies, and makeready, allowing for efficient production of hot foil stamping and embossing jobs. It supports a wide range of applications, including magazine covers, books, brochures, labels, invitations, and packaging. The system offers high profitability, ease of use, and the ability to personalize embossed hot foil.

Software and Usability
The iFOIL works in-line with the JETvarnish 3D digital spot UV coater. A software suite is included to modify layouts easily, supporting sizes from A4 to 52 x 105 cm and paper substrates from 150 to 700 microns. It is compatible with printing done on offset and digital presses, including the METEOR Digital Press Series.

Contact Information
For Europe, Middle East, Africa, and Russia: MGI, Ivry-sur-Seine, France. For America, Caribbean, and Asia Pacific: MGI, Melbourne, FL, USA.