MODEL: M2BW Super-mini Signal Conditioners Mini-M Series Dielectric strength: 2000 V AC @ 1 minute (Input or output to ground) EXTENDER MODULE Functions & Features • This Extender module is able to connect isolated transducers other than Mini-M modules to communication controllers (model: M2BC, M2BD) • Convenient when changing current signal into voltage signal thanks to 250 Ω built-in receiving resistor. 23 (.91) MODEL: M2BW ORDERING INFORMATION • Code number: M2BW GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Housing material: Flame-resistant resin (black) Built-in resistor: 5 - 8 shortcircuit connection INPUT & OUTPUT Internal resistance: 250 Ω (2 W) Allowable excitation voltage: -30 - +30 V When mounting with analog communication controller (model: M2BC, M2BD), install an isolated signal conditioner on the same control panel as the input. Do not connect other instruments to input terminals. INSTALLATION Operating temperature: 0 to 55°C (32 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % (with internal resistor) Temp. coefficient: ±0.003 %/°C (±0.002 %/°F) (with internal resistor) M2BW SPECIFICATIONS

MODEL: M2BW CONNECTION DIAGRAM + EXTERNAL DIMENSIONS unit: mm [inch] 6 [.23] DIN RAIL 35mm wide • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS SHORTCIRCUIT WIRE Specifications are subject to change without notice.