- Catalogs
- MG Co., Ltd.
- COP-US
COP-US
1 / 2 PagesView full catalog
COP-US
Product catalog summary
PC Configurator Cable Overview
This document provides the specifications for the COP-US model, a PC configurator cable designed to connect Remote I/O and Signal Conditioners to a PC via USB for parameter setting and monitoring.
Functions & Features
General Specifications
Communication
Connected Device Compatibility
Installation Requirements
Performance
External Dimensions
Note: Specifications are subject to change without notice.
This document provides the specifications for the COP-US model, a PC configurator cable designed to connect Remote I/O and Signal Conditioners to a PC via USB for parameter setting and monitoring.
Functions & Features
- Connects devices to PC's USB port using PC Configurator Software.
- Includes driver software CD-ROM.
General Specifications
- Connection: USB Type A connector and 3-pin, 2.5 mm diameter miniature jack.
- Housing Material: Black resin.
- Isolation: Between USB and miniature jack.
Communication
- Protocol: Full Speed USB 2.0, compatible with USB 1.1.
- Transmission Speed: Up to 38400 bps.
Connected Device Compatibility
- USB: PC/AT compatible.
- Operating Systems: Windows 11 (64-bit), Windows 10 (32-bit, 64-bit).
- Miniature Jack: Compatible with Remote I/O and Signal Conditioners.
Installation Requirements
- Operating Temperature: -5 to +60°C (23 to 140°F).
- Operating Humidity: 30 to 90% RH (non-condensing).
- Weight: 75 g (2.6 oz).
Performance
- Insulation Resistance: ≥ 100 MΩ with 500 V DC.
- Dielectric Strength: 500 V AC for 1 minute between USB and miniature jack.
External Dimensions
- Dimensions: 35 mm [1.38 inches] width, approximately 1000 mm [39.37 inches] length, 60 mm [2.36 inches] height, approximately 500 mm [19.69 inches] cable length, 2.5 mm [0.10 inches] diameter.
Note: Specifications are subject to change without notice.
See more
Catalog excerpts
(USB - miniature jack, isolated) Insulation resistance: > 100 MQ with 500 V DC Dielectric strength: 500 V AC @1 minute (USB to miniature jack) COP-US SPECIFICATIONS
Open the catalog to page 1
MODEL: COP-US EXTERNAL DIMENSIONS unit: mm [inch] approx. 1000 [39.37] Specifications are subject to change without notice. COP-US SPECIFICATIONS
Open the catalog to page 2All MG Co., Ltd. catalogs and technical brochures
M2DNY3 Pages
M2CDS4 Pages
M2CA3 Pages
M2BW2 Pages
M2BS-165 Pages
M2BS25 Pages
M2BS-165 Pages
M2BD7 Pages
M2BC8 Pages
M2AVS4 Pages
M2AS5 Pages
M2AP4 Pages
M2AMS4 Pages
M2ADS4 Pages
M2AC3 Pages
CNT2 Pages
CLSE2 Pages
CLSB3 Pages
MCN-CON1 Page
Remote I/O R3 Series7 Pages
Final Control Elements7 Pages
STRAIN GAUGE LOAD CELL2 Pages
Related Searches
- Actuator
- Force sensor
- Linear actuator
- Surge protector
- Electric actuator
- Data logger
- Tension/compression force transducer
- IO module
- Strain gauge force sensor
- Digital temperature control
- Digital indicator
- DIN rail lightning arrester
- Analog I/O
- Panel panel meter
- Position transducer
- USB datalogger
- Signal amplifying integrated circuit
- Temperature controller
- Weighing terminal
- Industrial gateway
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.