MODEL: CNT CONNECTOR TERMINAL BLOCK Functions & Features • Terminal board converting screw terminal wiring into a connector • Convenient in conjunction with various racks Insulation resistance: ≥100 MΩ with 500 V DC (between circuits and ground) Dielectric strength: 500 V AC @1 min. (between circuits) 1000V AC @1 min. (between circuits and ground) MODEL: CNT–[1] ORDERING INFORMATION • Code number: CNT-[1] Specify a code from below for [1]. (e.g. CNT-S) [1] MODEL S: 40 terminals (M4 screw) M: 40 terminals (M3.5 screw) RELATED PRODUCTS • Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Rating: 125 V AC or DC, 1 A Connection •Screw terminal CNT-S: M4 screw terminals (torque 0.8 to 1.2 N·m) CNT-M: M3.5 screw terminals (torque 0.8 to 1.2 N·m) Applicable wire size: ≤ 2 mm2 •Connector FUJITSU 40-pin connector (FCN-364P040-AU) INSTALLATION Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting CNT-S: Surface CNT-M: Surface or DIN rail Weight CNT-S: 350 g (0.77 lb) CNT-M: 280 g (0.62 lb) CNT SPECIFICATIONS

MODEL: CNT DIMENSIONS unit: mm (inch) ■ CNT-S 2–4.5 (.18) dia. MTG HOLE (Approx. 7 deep) 4–4.5 (.17) dia. MTG HOLE (Approx. 17.6 deep) Specifications are subject to change without notice.