Metzner Dynamat Fly-knife cutting machines with excellent cutting quality and a performance of up to 4000 cuts per minute

Precise cutting at high speed The »Dynamat series« of fly-knife cutting machines offers high performance cutting for tubes and round materials. Up to 4,000 cuts per minute means that these cutting machines are useful in all fields where production quantities are very high. Metzner Dynamat machines work reliably with elastic materials with a diameter of up 120mm and the results can be reproduced exactly. The machines are ideal for many products, from silicone tubes for medical use to strengthened textile tubes used in the automotive industry. Metzner cutting machines are available with either...

Individual possible uses Flexible tubes Reinforced tubes Round materials • Solid rubber round materials • Round rubber cords Silicon tubes PA tubes EPDM rubber tubes Catheter tubes Shrink tubing Brake hoses Textile and fabric tubes Cooling

Different machines Metzner offers four different basic models, each work with different diameters: • Metzner Dynamat 20 • Metzner Dynamat 40 • Metzner Dynamat 80 • Metzner Dynamat 120 All machines are available in three different versions: »Red - Green - Blue« • Red: Continuous cutting only, attractive price, combination with peripherals as stand-alone units • Green: Choice of »Stop-and-Go« cut (up to 400 cuts/min) or continuous cut, practical PLC controls • Blue: Cutting performance of up to 800 cuts per minute with »Stop-and-Go«, high speed PLC control

Metzner Dynamat 20 The compact bench model for thin tubes of up to 20mm in diameter: • Fly-knife cutting machines with excellent cutting performance of up to 4000 cuts per minute • Choice of »Stop-and-Go« cut or continuous cut • Electric belt adjustment Metzner Dynamat 40 / Dynamat 80 Designed for use with round materials of up to 40mm or 80mm in diameter: • Excellent cutting performance of up to 3200 cuts per minute • Choice of »Stop-and-Go« cut or continuous cut • Ready to use with optional blade mist lubrication system Metzner Dynamat 120 Designed for use with round materials of up to 120mm...

Excellent cutting performance The rotating blade of the fly-knife cutting machines offers outstanding cutting performance with speeds of up to 4000 cuts per minute, which is ideal for cutting a large number of items. Wide range of blade contours Metzner offers a wide range of different blade contours to suit various materials. This ensures optimum cutting for both, reinforced fabric materials and solid rubber, or even strongly elasticated tubes.

Metzner Ready for micro spray system All fly-knife cutting machines come, as standard, ready to be integrated with an optional micro spray system. Lubricating the fly-knife ensures that the cut quality is clearly increased and that the cutting knife is protected. Quickly interchangeable guides Changing to cutting another material diameter takes just a few simple steps. Due to the Metzner quick change system, all guides can be swapped in a few simple steps and without a specific tool. This ensures that the machine is ready for the next task in the quickest time possible. Chose the control system Depending...

Cost effective additions As well as high quality machines for processing rubber and plastic, Metzner also offers quick, careful and cost effective peripheral equipment that increases the automatic processing line. We classify our peripheral equipment into the following categories: • Unwinding and feeding • Printing and marking • Take off and winding • Remote controls • Software solutions and PC integration

Various cutting processes First class cutting results are achieved with intermittent »Stop-and-Go« cutting. The belt feeder transports the material to the exact position and stops for a short period while the cutting blade cuts through the material. In the short time the feed stops, a precise, square cut is made and a speed of up to 800 cuts per minute can be achieved. In continuous cutting mode, the feed does not stop. The material is constantly moving and is cut at the same time. This means the production output can increase to up to 4000 items per minute. The cutting quality is still very...

depending on material; tolerance min. ± 0.5mm | 2) at cutting length 5mm | 3) OP = Operator Interface Panel, PLC = Metzner PLC-controls with 5.7” colour touch-screen and CoDeSys programming, SE-PLC = Schneider Electric PLC-controls with 5.7” colour touch-screen and CoDeSys programming • = standard, O = optional, - = not available | Specifications are subject to change without notice.

Metzner Maschinenbau GmbH MesserschmittstraBe 30 89231 Neu-Ulm | Germany Phone: +49 731 40199-0 Fax: +49 731 40199-30 www.metzner.com