1. Catalogs
  2. METZ CONNECT
  3. M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking

M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking

M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking

M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking

Product catalog summary
Introduction
The document introduces METZ CONNECT's new M12 Push-Pull connectors, compliant with IEC 61076-2-010, designed for industrial applications such as factory automation, mechanical and plant engineering, intralogistics, and rail and transport technology. These connectors offer fast, tool-free connections with secure locking.

Key Features
- Tool-Free Installation: The Push-Pull technology reduces assembly and service times, minimizes assembly errors, and supports repeatable connection results.
- Efficiency and Quality: Enhances installation processes and increases efficiency during commissioning, maintenance, and service.

Specifications
- Standards: IEC 61076-2-010, DIN EN 50155, DIN EN 45545-2
- Connection Technology: A: 4, 5, 8; D: 4; X: 8
- Protection Degree: IP65, IP67, IP68
- Transmission: Signal, fieldbus, Industrial Ethernet
- Temperature Range: −40°C to +90°C
- Insulation Resistance: ≥ 108 Ω
- Mechanical Service Life: > 100 mating cycles
- Pollution Degree: 3
- Materials: Contacts: Gold-plated metal; Contact carrier: TPU or PA; Grip body: TPU
- Cable Lengths: 1 / 2 / 5 m

Applications
- Rail and Transport Technology: Vehicle cabling compliant with EN 50155 and EN 45545-2
- Robotics: Suitable for moving axes, vibration, and frequent mating cycles
- Intralogistics: Conveyor and sorting systems
- Mechanical and Plant Engineering: Service interfaces, fast setup, and changeovers
- Factory Automation: Sensor/actuator connectivity
- Mobile Automation: Industrial Ethernet, camera systems, sensor connections

Product Differentiation
The connectors are designed for demanding industrial conditions, supporting protection ratings up to IP68. They are tested for mechanical service life, locking and retention forces, and resistance to vibration, shock, and corrosion. The technology is applicable to both standard and customized solutions.

Product Configurator
METZ CONNECT offers a product configurator for M12 Push-Pull connectors and bus and rail vehicle products on their website.

Portfolio
The connectors are available in A, D, and X codings, suitable for signal, fieldbus, and Industrial Ethernet communication. Various cable types are available for different industry requirements.

Contact Information
Contact details for METZ CONNECT offices in the USA, France, Austria, China, Hong Kong, and Germany are provided.
See more

Catalog excerpts

M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-1

M12 Push-Pull Connectors according to IEC 61076-2-010 Overmolded Cordsets with Internal Locking

 Open the catalog to page 1
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-2

METZ CONNECT – M12 Push-Pull Connectors Plug in. Hear it click. Done. Overmolded connectors with push-pull locking With the new M12 Push-Pull connectors in plug configuration with internal locking, compliant with IEC 61076-2010, METZ CONNECT is expanding its portfolio of industrial connectivity solutions for demanding applications. Designed for use in factory automation, mechanical and plant engineering, intralogistics, and rail and transport technology, among other areas, these new solutions enable fast, tool-free connections while ensuring secure locking. Efficiency and quality gains Tool-free...

 Open the catalog to page 2
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-3

METZ CONNECT – M12 Push-Pull Connectors Overview of key specifications Parameter Standard / design IEC 61076-2-010, Push-Pull internal locking Railway standards Connection technology Degree of protection (installed) Ambient temperature Insulation resistance Mechanical service life Pollution degree Standard cable lengths Signal, fieldbus, Industrial Ethernet Contacts: Gold-plated metal, Contact carrier: TPU or PA, Grip body: TPU Connection cable 1 / 2 / 5 m, Interconnecting cable 1 / 2

 Open the catalog to page 3
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-4

METZ CONNECT – M12 Push-Pull Connectors Reliably connected – even under demanding conditions M12 Push-Pull connectors from METZ CONNECT are designed for applications that require fast installation, secure locking and robust connectivity

 Open the catalog to page 4
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-5

Factory automation Sensor/actuator connectivity, high connector density in the control cabinet Mechanical and plant engineering Service interfaces, fast setup and changeovers Intralogistics Conveyor and sorting systems, modular system sections Mobile automation Industrial Ethernet, camera systems, sensor connections (position, pressure and level sensors) Robotics Moving axes, vibration, frequent mating cycles Rail and transport technology Vehicle cabling in accordance with EN 50155 and EN 45545-2

 Open the catalog to page 5
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-6

METZ CONNECT – M12 Push-Pull Connectors The METZ difference The Push-Pull connectors are designed for demanding industrial operating conditions and support protection ratings up to IP67 or IP68. Product qualification includes testing mechanical service life, locking and retention forces, and resistance to vibration, shock and corrosion. M12 Push-Pull product configurator: This makes the solutions suitable for demanding applications in automation, transportation, intralogistics and mobile machinery. In addition, Push-Pull technology can be used for both products from the METZ standard portfolio...

 Open the catalog to page 6
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-7

METZ CONNECT - M12 Push-Pull Connectors The new connectors will be available in A, D and X codings at series launch, covering applications for signal, fieldbus and Industrial Ethernet communication. A range of cable types is also available, tailored to the requirements of different industries and applications - as in for example, highly flexible applications in mechanical engineering, robust mobile automation or data-intensive Ethernet communication. Sensor / actuator Data transmission Transportation Shielding Unshielded Shielded Connector head design Coding | Number of poles A | 4, 5, 8 A |...

 Open the catalog to page 7
M12 Push-Pull Connectors according to IEC 61076-2-010 – Overmolded Cordsets with Internal Locking-8

METZ CONNECT GmbH Im Tal 2 78176 Blumberg Germany Phone +49 7702 533-0 Fax +49 7702 533-189 [email protected] www.metz-connect.com 200 Tornillo Way Tinton Falls, NJ 07712 USA Phone + 1 732 389 1300 Fax + 1 732 389 9066 METZ CONNECT France SAS 28, Rue Schweighaeuser 67000 Strasbourg France Phone + 33 38 86 170 73 Fax + 33 38 86 194 73 METZ CONNECT AUSTRIA GmbH c/o German chamber of commerce in Austria Schwarzenbergplatz 5, Top 3/1 1030 Vienna Austria Phone + 43 1 227 12 64 Fax + 43 1 227 12 66 METZ CONNECT Zhongshan Ltd. Ping Chang Road Ping Pu Industrial Park Sanxiang Town Zhongshan City,...

 Open the catalog to page 8

All METZ CONNECT catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.