Catalogs >
Metso Corporation >
Tube Press Booster Range Brochure

Tube Press Booster Range Brochure
8Pages

Add to favorites

Catalog excerpts

Tube press – Booster range Superior performance

Open the catalog to page 1

2 Tube press booster range

Open the catalog to page 2

High pressure mechanical dewatering General The tube press is a fully automated variable chamber, filter press designed in a cylindrical format and capable of operating at high filtration pressures up to 100 bar. The use of these high pressures enables a higher degree of separation of the liquid and solid phases. The tube press is typically suitable for applications: • Where protection of the environmental conditions are important • Where energy consumption is significant i.e. thermal drying is used for the separation • Where the product consists of very fine particles, difficult to dewater...

Open the catalog to page 3

Cycle start Filling cycle Tube press – Booster range A compact intelligent dewatering system for small scale applications in mineral, chemical and pharmaceutical industries. The booster range of tube presses are generic for a new compact dewatering system. The Booster range includes three sizes of installations to suit the requirements of small to medium scale installations, laboratory and pilot scale installations. Tube press “Compact filtration unit”/ Booster system The booster is an individual drive system closely coupled with the tube press. The installation is very compact combining...

Open the catalog to page 4

Slurry Line CD Air Line Flush Water Line Service Air Line Filtrate Discharge Cake Discharge Applications 1 Typical filtercake moisture contents • Coal Fines and Shales 15-20% soft / sticky plastic brittle Typical "super fine"

Open the catalog to page 5

The Booster range is a compact design and easy to install, as shown here in a container to allow mobile and temporary production. Features and benefits • Low cake moisture • Excellent liquid/solid separation • The Tube Press Booster has a compact design and is easy to install. • Environmental advantage by high grade of recovery • Maximum energy exchange • Closed media circuit • Fully optimized control • Useful quality production information and data exchange • Maintenance friendly • Easy to expand • Few moving parts • Increased efficiency by on line process control Booster drive unit 6 Tube...

Open the catalog to page 6

*Distance to discharge point, i.e. belt conveyor Dimensions in mm Technical data SC500 1,2m/75: 75 Litre Tube chamber volume. Filter area m2: 1,35 Maximum pressure 100 Bar Installed power: 7,5kW SC500 3m/200: 200 Litre Tube chamber volume Filter area m2: 3,45 Maximum pressure 100 Bar Installed power: 11kW SC500 1,5m/100: 100 Litre Tube chamber volume Filter area m2: 1,73 Maximum pressure 100 Bar Installed power: 7,5kW Control system The tube press is operated from the operator's monitor located on the control panel. The monitor is connected to a PLC that handles the control logics and...

Open the catalog to page 7

• Metso Minerals Industries, Inc. 2715 Pleasent Valley Road, York, PA 17402, USA, Phone: +1 717 843 8671 • etso Minerals (South Africa) (Pty) Ltd. M • Metso Minerals (Australia) Ltd. • Metso Minerals (India) Pvt Ltd 1th floor, DLF Building No. 10, Tower A, DLF Cyber City, Phase - III, Gurgaon - 122 002, India, Phone: +91 124 235 1541, Fax: +91 124 235 1601 • Metso Minerals (Chile) S.A. • Metso Brasil Indústria e Comércio Ltda. Av. Independência, 2500 Éden, 18087-101 Sorocaba-SP - Brazil, Phone: +55 15 2102 1300 www.metso.com E-mail: minerals.info@metso.com Metso Corporation, Fabianinkatu 9...

Open the catalog to page 8

Tube Press Booster Range Brochure 8Pages

Catalog excerpts

All Metso Corporation catalogs and technical brochures

Tube Press Booster Range Brochure
8Pages