Extra heavy duty slurry pumps \ B^I—U

Thomas X series of extra heavy duty Rubber lined and hard metal slurry pumps Thomas XR (rubber lined) and XM (hard metal), extra heavy duty slurry pump range is designed for the most arduous pumping applications. The rugged “wet end” is designed with extra thick metal or rubber sections at points exposed to high wear rate. The high aspect ratio ­ etal or rubber impeller m ensures excellent performance with long wear life. Bearing assembly Wet end bearing Drive end bearing Drive end thrust bearing Example of pump designation XR 400 Inlet Size (mm) Pump Range: XR Rubber Casing halves Shaft sealing...

Summary of design features • Modular design technology • Robust construction designed for maximum performance with highly abrassive slurries • Computer aided designed thick volute casings and heavy duty large diameter impellers, carefully matched, to provide high efficiency hydraulics for even wear ­ and minimum power consumption Bearing assembly Drive end bearing Shaft • Materials used are the very best available, providing both ­ xcellent wear properties e and corrosion resistance • Self contained bearing cartridge assembly with oversized shaft and three anti-friction bearings with oil lubrication...

Details of design features XR & XM Modular design Bearing assembly State of the art computer aided design provides an extremely robust, yet compact, end suction pump. The carefully executed modular design technology allows optimum pump and material selection. These pumps operate at or near their highest efficiency, ­ thereby reducing both the rate of wear and the power consumed. The oversized high strength alloy steel shaft is carried in oil lubricated anti-friction b ­ earings mounted in a self-contained cartridge assembly. The cartridge itself fits on ­ to a severe duty bearing frame and is...

Ease of maintenance The unique “crowbar”or hydraulic operated Slide Base option, combined with the stan­ dard “back pull-out” feature, gives immediate access to the rotating assembly and shaft seal without disturbing the inlet and outlet ­connections. Motor size Motor size and V-Belt drive vary with the pump application. Minimum data required for an approximate pump, speed and drive motor selection: Coal Slurry Power Plant Ash Slurries Mine Tailings Sand Options Slide Base • For ease of maintenance Motor Mountings • Side mounted • Overhead mounted • Reverse overhead mounted • Slurry flow rate...

Details of design features MATRI-X The Thomas MATRI-X series pump range is designed for concentrated slurry hydrotransport applications requiring higher pressure rated pumps. In addition to the design features of the Thomas ”X” series pumps, the MATRI-X series Pumps are standard with a wet end bearing isolator to prevent bearing cylinder contamination. The hydraulic design of the MATRI-X series pumps have enlarged passage ways through the impeller and volute to maintain reduced internal velocities minimizing wear while maximizing pump efficiency and performance and capability of handling large...

Pump dimensions Selection of pump size * Bare shaft weight Extra heavy duty slurry pumps 7

• Metso Minerals Industries Inc. 4820 Centennial Blvd, Suite 115, Colorado Springs, Co 80919-3351, USA, Phone: +1 719 471 3443, Fax: +1 719 471 4469 • Metso Minerals Industries Inc. P.O. Box 96, Birmingham, AL 35201, USA, Phone: +1 205 599 6600, Fax: +1 205 599 6623 • etso Minerals (South Africa) (Pty) Ltd. M Private Bag X2006, Isando, Johannesburg,1600, South Africa, Phone: +27 11 961 4000, Fax: +27 11 397 2050 • Metso Minerals (Australia) Ltd. Level 2, 1110 Hay Street, West Perth, WA 6005, Australia, Phone: +61 8 9420 5555, Fax: +61 8 9320 2500 • Metso Minerals (India) Pvt Ltd 1th floor, DLF...