Catalogs >
Metso Automation >
Vertimill for limeslaking

Vertimill for limeslaking
1 / 2Pages

Catalog excerpts

VERTIMILL® Lime Slaker VERTIMILL® Lime Slaker Metso draws from more than 100 years of mill design and manufacturing expertise and three decades of successful VERTIMILL® applications. The VERTIMILL® is an energy efficient and cost saving alternative to tumbling mills and paste or detention type lime slakers. Advantages include: • Superior lime slaker • Ultra fine, highly reactive hydrated lime product • No grit removal required • Capable of operating in open or closed circuit configurations • Large capacity and turndown • High retention time • Minimal maintenance • Ease of operation Preselected Mills for Lime Slaking: Model Typical Operating Conditions: Pebble lime with 5 – 20% grit Feed size Product size 80 – 95% passing 325 mesh (depending on circuit configuration) Percent solids (product) Slurry temperature inside mill The values listed above are typical; slaking temperature, % solids, and product size are a function of site specific feed and operational conditions. The VERTIMILL® is robust technology capable of slaking under varying operating conditions. Please consult your local Metso representative for a detailed assessment of your application. For more information, contact your local Metso representative. 2715 Pleasant Valley Road York, PA , USA 17402 Direct: +1 717 843 8671 | Fax: +1 717 845 5154 www.metso.com Specifications in this document are subject to change without notice. Product names in this publication are all trademarks of Metso Corporation.

Open the catalog to page 1

Lime Slaker Questionnaire Require Data and Prices for: Budget Estimate o Application: Flue Gas Desulfurization o Firm Detailed Proposal o The applicable requirements are: 1) Feed Characteristics: Feed Size 2) Quality of Lime: % CaO Size of grit Capacity mtph/stph % MgO Type: High Calcium o 3) Product Characteristics: Product Size % Solids 4) Water Characteristics: Process Water Temperature ° F/C Water Quality: Potable Y o Chlorides ppm 5) Site Characteristics: Site Elevation masl/fasl Site Temperature Range ° F/C Installation...

Open the catalog to page 2