Conveyor Solutions \ wv%^hcf\ Trellex® Pulley and Roller Lagging \ ^^~2

Trellex® Pulley and Roller Lagging A conveyor belt that slips causes significant damage to both the drive pulley and the belt. Material build-up on the drive pulley cause mistracking, which not only damages the belt and conveyor, but also leads to spillage. This is efficiently prevented by installing Trellex pulley laggings. They will reduce belt and pulley wear and improves belt controllability. An investment in the belt life and fever unplanned stops. Running a conveyor without pulley lagging on the drive pulley is like driving a car with worn tires. The more treacherous the conditions, the...

Trellex® Cer-Lag – ceramic inserts for extremely high wear resistance Suitable for wet and muddy conditions Trellex is now launching an entirely new driving pulley lagging with ceramic inserts. It is extremely effective in difficult working conditions such as wet and muddy conditions where belt slippage occurs. The hard-wearing ceramic inserts produce extremely high wear resistance. The increased friction between the driving pulley and the belt means that the belt tension can be reduced, which in turn reduces the load on the conveyor’s other components, such as rollers, bearings and the conveyor...

Trellex® Griplag – the problem solver for drive pulleys operating under tough conditions Long life – Reduces maintenance costs Trellex Griplag has a special design that provides a number of unique advantages; the rubber element features a metal strip that is vulcanised into the front edge of the rubber. This strip contains several holes for fixing the rubber to the pulley using self-tapping screws. This special fixing method, combined with the elasticity of the rubber and the round, conical stubs protruding from the surface of the element, means that Trellex Griplag is able to eliminate practically...

Trellex Pulley Bars – rugged design for heavy duty drive pulleys Rugged design – Suited for heavy duty operation Trellex Pulley Bars are constructed with heavy-duty operation in mind and are made from a durable, long lasting rubber compound. An aluminium profile has been vulcanised into the rubber and bars are fixed in position on the pulley with self-tapping screws. The design of the bar lends itself to inclined and vertical lift conveyors. Trellex Pulley Bars are symmetrical. This means that they are ideally suited for use with reversible operation conveyors. Trellex Pulley Bars have a long...

Trellex® Traclag – Universal pulley lagging for use on a variety of pulleys Extensive area of use – Fits most pulley types Because of its wide range, Trellex Traclag can fit most pulley types and sizes. It can also be used effectively with turn and breaker pulleys. In addition, Trellex Trac-lag is suitable for use as pulley lagging on drive pulleys in reversible conveyors. Applied to pulleys using adhesive, its symmetrical pattern affords excellent grip between conveyor belts and pulley lagging in both directions. The topside of the lagging is available in either diamond, herringbone pattern,...

Trellex® Roller Sleeve – Rubber lagging for conveyor rollers Prevents material build-up – Improves belt centering One of the most common causes of mistracking is the build up of material on return rollers. When no scrapers or poor quality scrapers are used on a conveyor, a certain amount of material will remain on the belt after the discharge point. This material has a propensity to form build-up on the return rollers. When this happens, the roller loses its consistent diameter and the belt becomes exposed to forces that makes it pull to one side. As a result, both the edge of the belt and the...

Metso Minerals (Wear Protection) AB Conveyor Solutions For contact with your local Metso representative, visit for information about your nearest sales office. Subject to alteration without prior notice. Brochure No. 2367-04-10-MBL/Trelleborg-English © 2010.04 Metso Printed in Sweden