Catalogs >
Metso Automation >
Trellex flexopipe

Trellex flexopipe
8Pages

Add to favorites

Catalog excerpts

Conveyor Solutions

Open the catalog to page 1

Conveyor Solutions

Open the catalog to page 2

Trellex Flexopipe® – flexible, unique, ecological! Conveyor belt systems of enclosed material transport are an excellent solution to various conveying problems. Metso is Europe’s leading and most experienced manufacturer of belts for enclosed conveyor systems. Worldwide the belts are known under the trademark Trellex Flexopipe®. Enclosed material transport Remarkable advantages of enclosed material transport compared to conventional troughed belt conveyors : Horizontal and vertical curves enable the routing over difficult terrain conditions. Fewer transfer points lead to smooth treatment of...

Open the catalog to page 3

The principle In the loading area the Trellex Flexopipe® belt is troughed like conventional belts. After loading special idlers form the belt into a pipe shape with overlapped belt edges. The material being conveyed is completely enclosed by the belt. Hexagonally arranged idler rolls keep the belt closed over the track. Close to the conveyor head the belt opens out into a normal troughed belt supported by 3-roll idlers and runs flat over the discharge pulley to unload the material. In the return strand the belt closes again into a pipe where its overlapped edges in general are on the...

Open the catalog to page 4

The Trellex Flexopipe® Belt Conveyor systems for closed material transport are demanding applications with high requirements for the conveyor belt. Trellex Flexopipe® conveyor belts are specially developed for these systems. Belt conveyors where only the return strand has a pipe shape, is already a solution to eliminate contamination below the conveyor. Flexopipe® solution Flexible and adaptive conveyor configuration • Individual belt design for every application • Wide selection of reinforcement types • ailor-made belt construction with specially developed T reinforcements and rubber...

Open the catalog to page 5

Cover Grades Trellex Flexopipe® conveyor belts offer a complete range of rubber covers allowing the useage in the whole field of mining or industrial applications. Enclosed transport of hot material does not allow heat exchange to the atmosphere, therefore material temperatures must be lower than in conventional installations. The table shows a selection of cover grades. Further cover grades available on request. Applications (example) Wear resistant, heavy duty cover for sharp and Ore, rock, limestone lumpy material, or extreme drop heights Wear resistant cover for standard aplication...

Open the catalog to page 6

Conveyor Parameters Key parameters to select the appropriate pipe diameters are the conveying capacity and lump size. Roll diameters and lengths are for standard (inline) design of the hexagon. Nominal pipe diameters and belt widths may vary from those values in the table depending on the OEM. The design of the Pipe conveyor should consider the characteristics of the installed conveyor belt. The range of Trellex Flexopipe® belts comprises reinforcements with different elastic moduli. A more elastic belt allows narrower curves and shorter transition lengths (distance between pulley and first...

Open the catalog to page 7

Metso Minerals (Deutschland) GmbH Conveyor Solutions Uerdinger Strasse 48 DE-47 441 Moers Germany Phone: +49 2841 16955-0 Fax: 49 2841 16955-127 + Metso Minerals (Sweden) AB Conveyor Solutions P.O. Box 74 SE-231 21 Trelleborg Sweden Phone: +46 410 525 00 Fax: +46 410 526 02 www.metsominerals.com For contact with your local Metso representative, visit www.metsominerals.com/trellex for information about your nearest sales office. Subject to alteration without prior notice.

Open the catalog to page 8