Screening and Conveyor Solutions Trellex Conveyor Accessories Expect results

Reliability in Conveying A dirty environment often results in poor finances. Maintenance is neglected, bearings and the life of other components is impaired. The number of operating stoppages and disturbances has a negative impact on production. Unscheduled conveyor stoppages may be costly, as the belt acts as a process artery. The main whys and wherefores of conveyor material spillages lie with loading and unloading of materials. Spillage is caused during unloading as a result of some materials being left on the belt after the turn. This material sticks to the belt and is released Screening...

We have the solution – we know what to do, and how to do it Carry back What to do Clean the belt at the discharge point. How to do it Use Trellex Engineered Belt Cleaning System. A Pre-Cleaner in combination with a T-Cleaner or an Arm-Cleaner is the most efficient solution for smooth belts. If a single cleaner is required, the Pre-Cleaner is recommended for coarse or wet and sticky material, the T-Cleaner and Arm-Cleaner for dry and fine material. For reversible belts a T-Cleaner is a good solution. For cleated belts carrying dry material a Trellex Belt Brush is the best solution. Spillage What...

Belt Cleaning Pre-Cleaner The Pre-Cleaner is positioned against the drive pulley immediately below the flow of material. It consists of a number of separate segments which are able to move independently of one another for maximum flexibility. The Pre-Cleaner blade is made of wear-resistant polyurethane, providing a long service life. The blades have a good scraping effect without damaging the belt. The individual blades are mounted in an aluminium cassette which makes fitting and replacing worn blades quick and easy. Spring Tensioners ensure that correct pressure is Screening and Conveyor Solutions...

Belt Brush Easy Clean and PU Strips rubber body, providing individual flexibility. A Spring Tensioner provides the correct applied pressure for the entire life of the cleaner. The metal blades are more suited for higher temperatures and belt speeds than other types of cleaner blades. Belt Brush An efficient Belt Brush for cleated belts carrying dry, fine materials. The belt is kept clean and spillage below the belt is reduced. This results in lower maintenance costs and less clean up. The brush is driven by a completely enclosed drum motor in which all motor parts are well protected and operate...

Impact cradle Impact System Impact Bar Trellex Impact Bars are used when high levels of energy absorption are to be encountered and low friction drag is desirable. They are most often used at the conveyor’s loading point, where they replace traditional impact idlers. The T-bolt fixing system makes installation quick and easy. Trellex Impact Bars has no moving parts, thus avoiding problems with bearings that break down and rollers that freeze. Trellex Impact Bar dramatically reduces down time and maintenance costs, lengthens the service life of belts and conveyors and improves the work environment....

Trellex Belt Conductor RBC Trellex Belt Conductor SBC & HDBC Belt Guiding Belt Conductor A centred belt is one precondition if the Sealing System at the loading point is to work. Reducing spillage increases revenue and provides a better work environment. The Trellex Belt Conductor is mounted on the return run of the belt and provides active restraint and constant control of the belt. This avoids damage to the edge of the belt and important parts of the frame. The edge rollers of the Belt Conductor sense any mistracking of the belt and the control roller centres the belt. No risk of pinching and...

Sealing System Clamp-on Trellex Clamp-on sealing system is an efficient system for sealing belts in the loading zone. The blocks overlap one another to prevent material spillage at the joints between them. The polyurethane blocks are held in place by an aluminium profile that is locked in place using a quick-release fastener that makes assembly and adjustment quick and easy. The costs of service and maintenance is therefore lowered. The material in the blocks allows a long service life while also being kind to the belt. Reducing material spillage also reduces clean-up cost and improves the work...

Screening and Conveyor Solutions

Pulley and Roller Lagging Cer-Lag Trellex Ceramic pulley lagging Cer-lag is extremely effective in difficult working conditions such as wet and muddy conditions where belt slippage occurs. The hard-wearing ceramic inserts produce extremely high wear resistance. Griplag Trellex Griplag has a unique design that prevents slippage while also being selfcleaning, thus preventing material build-up and misalignment. Trellex Griplag can take up the relative movement between the drum and the belt, caused by the difference in belt elongation on the carrying and return side of the belt. This gives Trellex...

Roller Sleeve Other Products Roller Sleeve Trellex Roller Sleeve is an elastic rubber sleeve that is mounted on return rollers. The elasticity of the rubber counteracts the build-up of material on the roller thus preventing misalignment. The rubber also protects the rollers against corrosion and wear, lengthening their service life and reducing the risk of damage to the belt. Trellex Roller Sleeve is simple to install using an adapter and compressed air. Inspection Hatch The Trellex Inspection Hatch makes it easy to inspect and maintain items such as belt cleaners, brushes and vibrating screens....

Metso Minerals (Sweden) AB Screening and Conveyor Solutions P.O. Box 132 SE-231 22 Trelleborg Sweden Phone: +46 410 525 00 Fax: +46 410 526 04 www.metsominerals.com For contact or information about your nearest sales office please visit: www.metso.com Subject to alteration without prior notice.