Screening and Conveyor Solutions Trellex Aramid Conveyor Belts

Unbeatable strength-to-weight ratio Trellex® Aramid conveyor belts combine a strong and light reinforcement with a variety of cover materials, making this product the perfect solution for all kinds of applications.Tensile strengths from 500 to 2500 N/mm. Cover grades are available as wear, heat, oil and grease or flame resistant. Special attention should be paid to all conveyor details, that have an influence on the high modulus of Trellex Aramid Conveyor Belts, eg. transition distances, pulley diameters or curve radii. High-performance fiber Aramid Trellex Aramid Conveyor Belts are reinforced...

Aramid belt with cord fabric Aramid belt with straight-warp fabric Exactly the right fit We can also offer a belt construction with higher elasticity (please refer to the tables in this brochure). For the correct adjustment of conveyor and belt, our engineers can help you to perform the necessary calculations quickly. Breaker plies for Trellex Aramid Belts with cord fabric Different polyamid breakers can be chosen to protect the cord fabric against rips or heavy impact: Type TN on one or both sides; type XN is a double-breaker, with diagonal cords. TN-Breaker Screening and Conveyor Solutions

Aramid Belts with low-elongation cord fabric Designation Belt strength N/mm Modulus of elasticity kN/mm * Standard covers, grade X Trellex Aramid Belts with regularelongation cord fabric This belt type is designed for conveyors with demand for a more elastic reinforcement. It is recommended for installations with curves, low transition distances, and if there is more take-up length available, e.g. stackers/reclaimers. Trellex Aramid Belts with low-elongation cord fabric Aramid Conveyor Belts with a high modulus cord fabric are the right choice for long conveyors with limited take-up length. Screening...

Aramid Belts with low-elongation cord fabric Designation Belt strength N/mm Modulus of elasticity kN/mm * Standard covers, grade X Aramid Belts with low-elongation straight-wrap fabric Designation Belt strength N/mm Modulus of elasticity kN/mm * Standard covers, grade X Screening and Conveyor Solutions

Group C pulleys: Snub, deflection or other pulleys, where belt wrap angle is ≤ 45° Group A pulleys: Drive, discharge or other pulleys, where belt tension is relatively high Group B pulleys: Return, bend, takeup, or other pulleys, where belt tension is relatively low Pulley Diameters Pulley diameters Recommended minimum pulley diameter Group A For the selection of the correct pulley diameter, the strength utilization has to be considered. The recommended diameters also depend on the pulley group. Utilization Belt type * Standard covers, grade X Cover Grades Aramid Belts with low-elongation cord...

Overlap splices are recommended for Aramid belts with Cord Fabric up to 1250 N/mm. Regular splices are always hot vulcanised. Two splicing methods are possible Other Aramid belt types Designation Belt strength N/mm Other Aramid belt types should be joined with a finger splice. This is also the right method, if a smooth transition of belt and carcass is desired. Particular attention should be given to the splicing procedure, as it seriously affects the splice strength. The use of Trellex splicing material is strongly recommended. The dimensions of both overlap and finger splices are listed in...

Metso Minerals (Sweden) AB Screening and Conveyor Solutions P.O. Box 132 SE-231 22 Trelleborg Sweden Phone: +46 410 525 00 Fax: +46 410 526 04 www.metsominerals.com For contact or information about your nearest sales office please visit: www.metso.com Subject to alteration without prior notice.