Slurry Pump Wet end conversion kit Overcomes traditional slurry pump problems

Slurry pump Metso’s wet end conversion kit overcomes traditional slurry pump problems such as low hydraulic efficiency, premature component failure, inconsistent performance, ineffective centrifugal seals and difficult maintenance. The impeller design incorporates partial mixed flow main vanes, reducing inlet shock losses at the suction eye. Hydraulic turbulence and recirculation within the casing and impeller are reduced, to yield high efficiencies and longer component life. Adjustment permits closing the impeller on both sides of the casing, with clearances that result 2 in vastly improved...

Easy installation Metso slurry hose Suction and discharge slurry hoses with fixed pump flange on one side and loose flange on opposite side, suitable to bolt to existing pipe work. The hose supplied will be a Metso standard hose that is currently marketed globally and would be able to be cut to size on site and installed. This will be a temporary situation giving the customer an opportunity to have the existing pipe work modified when convenient. Fabricated make up pieces are also available if preferred. Easy adjustment ADJUSTMENT SCREW Impeller wear clearance adjustment This simple operation...

• Metso Minerals Industries Inc. 4820 Centennial Blvd, Suite 115, Colorado Springs, Co 80919-3351, USA, Phone: +1 719 471 3443, Fax: +1 719 471 4469 • Metso Minerals Industries Inc. P.O. Box 96, Birmingham, AL 35201, USA, Phone: +1 205 599 6600, Fax: +1 205 599 6623 • etso Minerals (South Africa) (Pty) Ltd. M Private Bag X2006, Isando, Johannesburg,1600, South Africa, Phone: +27 11 961 4000, Fax: +27 11 397 2050 • Metso Minerals (Australia) Ltd. Level 2, 1110 Hay Street, West Perth, WA 6005, Australia, Phone: +61 8 9420 5555, Fax: +61 8 9320 2500 • Metso Minerals (India) Pvt Ltd 1th floor, DLF...