Vertical & horizontal ST Pumps Tough, general purpose slurry pumps

The Sala-series of ST Pumps The ST-Pump range consists of tough, general purpose slurry pumps particularly known for their induced flow impellers. The hydraulic design provides a very gentle handling of the slurry. The proven low attrition of pumped particles has made it the Industrial Standard for Carbon Transfer in Gold Leaching processes. The ”cloggless” performance of the induced flow impellers also makes this product range ideal for all applications where large or long, stringy solids will be handled. Vertical torque flow pumps type STGVA Vertical wet pit design for pulpy solids and corrosives....

STGVA vertical pumps Heavy Duty, large cantilevered shaft reduces deflection and provides stable mechanical operation. Simple impeller clearance adjustment from the top of the pump. Cast Iron bearing housing is piloted in the upper frame to assure perfect alignment. Oversized grease lubricated roller bearings are designed to provide up to 60,000 hours of trouble free operation. Grease-purged labyrinth and double V-ring seals effectively eliminate lower bearing contamination. Rigid lower frame minimizes pedestal deflection. No submerged bearing or stuffing box provides virtually maintenance-free...

Horizontal torque flow pumps STHM The STHM pumps are also available with alternative impeller designs which allow optimum adaption to different media - from heavy suspensions to clean liquids. Motor bed plate Overhead motor bed plate gives compact installation with extra motor protection and simple belt tensioning. Vortex or channel impeller Vortex impeller for heavy suspension and liquid/gas mixture. Channel impeller for light suspensions and clean liquids. Vortex impeller The vortex impeller is recessed in the back of the pump casing, giving a free passage through the casing. The pump can normally...

STHM horizontal pumps 1. Fabricated steel base is fully machined to provide perfect alignment and concentricity. 2. Large diameter oversized shaft minimizes deflection and provides smooth running, stable operation. 3. Simple impeller clearance adjustment from drive side of pump. 4. Heavy duty grease lubricated roller bearings enclosed in a cartridge type bearing housing. 5. Overhead motor plate for V-belt drive operation minimizes space requirements (side by side baseplates or common baseplate for direct drive also available). 6. Grease purge labyrinth and double V-ring seals prevent the ingress...

Selection of pump size Vortex impeller* Channel impeller** Pump dimensions Section A-A A Pump type STGVA Frame

Selection of pump size Selection of pump size Vortex impeller* Channel impeller** Pump dimensions Pumpdimensions B *Pumps with vortex impeller are identified with W, e.g. STHM 76 W. **Pumps with channel impeller are identified with a digit, e.g. STHM 76 5. The digit specifies number of vanes in the impeller. The information contained herein is general and is not intended for specific installation or application purposes. Metso reserves the right to make changes in specifications shown herein at any time without notice or obligation.

• Metso Minerals Industries Inc. 4820 Centennial Blvd, Suite 115, Colorado Springs, Co 80919-3351, USA, Phone: +1 719 471 3443, Fax: +1 719 471 4469 • Metso Minerals Industries Inc. P.O. Box 96, Birmingham, AL 35201, USA, Phone: +1 205 599 6600, Fax: +1 205 599 6623 • etso Minerals (South Africa) (Pty) Ltd. M Private Bag X2006, Isando, Johannesburg,1600, South Africa, Phone: +27 11 961 4000, Fax: +27 11 397 2050 • Metso Minerals (Australia) Ltd. Level 2, 1110 Hay Street, West Perth, WA 6005, Australia, Phone: +61 8 9420 5555, Fax: +61 8 9320 2500 • Metso Minerals (India) Pvt Ltd 1th floor, DLF...