
RCI9H is intended to be used together with the Neles ValvGuard VG9000H safety valve controller. It is needed when a 24 VDC output (DO) is used in the safety system. RCI9H also includes an isolated barrier and can thus also be used for intrinsically safe applications. RCI9H provides HART communication for diagnostics and configuration of the VG9000H. The HART communication is available when a 24 VDC power supply is connected, also during the emergency trip. 24 VDC input from ESD 4/20 mA output to VG9000H Isolated barrier Line fault detection (LFD) Up to SIL3 acc. to IEC 61508 IEC61508 certificate RCI9H is approved by exida to be used in safety applications up to and including safety integrity level 3 (SIL3).
Open the catalog to page 1TECHNICAL DATA Input Connection Signal level terminals 10+, 111-signal: 19...30 VDC (24 VDC nominal) 0-signal: 0...5 V DC 40 mA at 19...30 V DC < 1.2 W loop powered Input current Power consumption Operating mode terminals 1+, 3(terminals 1+, 2 for test loop) 1-signal: 20.4 mA 0-signal: 4.2 mA > 13.5 V at 20.4 mA ≤ 650 Ω input to output < 40 ms short circuit voltage < 1 V, open circuit voltage > 16 V Current Output voltage Load Response time Line fault detection HART Connection terminal 7: source (-) or sink (+) terminal 8: source (+) terminal 9: sink (-) fixed at 11 mA, source or sink mode 9...30...
Open the catalog to page 2ADDITIONAL ACCESSORIES Power feed modules KFD2-EB2 The Pepperl+Fuchs power feed module is used to supply the device with 24 V DC via the Power Rail. The fuse-protected power feed module can supply up to 100 individual devices depending on the power consumption of the devices. A galvanically isolated mechanical contact uses the Power Rail to transmit collective error messages. Front view Removable terminal blue Power Rail UPR-03 LED red: LB/LK Test mode Position I: normal mode Position II: test mode Wiring connections LED green: Power supply The Pepperl+Fuchs Power Rail UPR-03 is a complete unit...
Open the catalog to page 3Subject to change without prior notice. Metso Automation Inc. Europe, Vanha Porvoontie 229, P.O. Box 304, FI-01301 VANTAA, Finland. Tel. +358 20 483 150. Fax +358 20 483 151 North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, MA 01545, USA. Tel. +1 508 852 0200. Fax +1 508 852 8172 South America, Av. Independéncia, 2500- Iporanga, 18087-101, Sorocaba-São Paulo, Brazil. Tel. +55 15 2102 9700. Fax +55 15 2102 9748/49 Asia Pacific, 20 Kallang Avenue, Lobby B, #06-00, PICO Creative Centre, Singapore 339411, Singapore. Tel. +65 6511 1011. Fax +65 6250 0830 China, 19/F, the Exchange Beijing,...
Open the catalog to page 412 Pages
1 Page
4 Pages
12 Pages
51 Pages
9 Pages
6 Pages
20 Pages
8 Pages
204 Pages
8 Pages
16 Pages
4 Pages
8 Pages
2 Pages
2 Pages
8 Pages
6 Pages
8 Pages
4 Pages
8 Pages
4 Pages
5 Pages
12 Pages
8 Pages
8 Pages
12 Pages
1 Page
8 Pages
6 Pages
8 Pages
2 Pages
8 Pages
8 Pages
8 Pages
8 Pages
2 Pages
4 Pages
2 Pages
2 Pages
12 Pages
4 Pages
2 Pages
8 Pages
4 Pages
2 Pages
8 Pages
6 Pages
114 Pages
8 Pages
44 Pages
16 Pages
4 Pages
8 Pages
12 Pages
8 Pages
4 Pages
8 Pages
12 Pages
28 Pages
2 Pages
4 Pages
2 Pages
12 Pages
8 Pages
4 Pages
4 Pages
6 Pages
6 Pages
10 Pages
4 Pages
8 Pages
20 Pages
6 Pages
2 Pages
2 Pages