NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX
8Pages

{{requestButtons}}

Catalog excerpts

NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 1

NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX Metso’s Neles NDX is the next generation intelligent valve controller working on all single acting control valves and in all industry areas. It guarantees end product quality in all operating conditions with incomparable performance, unique diagnostics, and years of reliable service. The NDX is a futureproof investment with life-time support for asset management. Total cost of ownership □□ Fast and reliable installation process □□ Low energy and air consumption □□ Easy to use diagnostics simplify determining when valve maintenance is required □□ Inherent high air capacity eliminates additional instrumentation □□ One positioner that fits to small and big valves, rotary and linear: □□ Reliable and robust design □□ Industry leading pneumatic capacity □□ Benchmark control performance □□ Simple and fastest installation and commissioning □□ Local / remote operation □□ Wide language support □□ Expandable architecture □□ HART 6/7 communication as standard □□ Diagnostics available in every unit □□ Self-diagnostics □□ Online diagnostics □□ Communication diagnostics □□ Extended off-line test capabilities □□ Worldwide support for hazardous area approvals Options □□ Internal position transmitter □□ Gauge block Minimized process variability □□ Linearization of the valve flow characteristics □□ Excellent dynamic and static control performance □□ Fast response to control signal change □□ Accurate internal measurements Easy installation and configuration □□ Simple / fast configuration and calibration using one of the following: □□ Standard Local User Interface (LUI) assessable without opening the device cover □□ LUI can be rotated according to mounting position □□ Distributed Control System (DCS) asset management program □□ Backwards compatible with retrofit kits for easy replacement of Metso NE700 and ND9000 positioners. □□ Easy retro-fit to an extensive list of 3rd party control valves □□ Installation to all common control systems Open solution □□ Metso is committed to delivering products that freely interface with software and hardware from a variety of manufacturers; NDX is no exception. This open architecture allows the NDX to be integrated with other field devices to give an unprecedented level of controllability. □□ F

Open the catalog to page 1
NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 2

NDX mounting on actuators and valves □□ Supports all single acting actuators □□ Both rotary and linear valves □□ Guided startup and automatic/manual calibration □□ 1-point calibration feature enables mounting without disturbing the process Product reliability □□ Designed to operate in harsh environmental conditions □□ Rugged modular design □□ Excellent temperature characteristics □□ Vibration and impact tolerant □□ IP66 enclosure □□ Protected against humidity □□ Resistant to dirty air □□ Wear resistant and sealed components □□ Fully contactless position measurement Predictive maintenance □□...

Open the catalog to page 2
NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 3

TECHNICAL SPECIFICATIONS NDX INTELLIGENT VALVE CONTROLLER General Loop powered, no external power supply required. Suitable for linear and rotary valves. Actuator connections in accordance with VDI/VDE 3845 and IEC 60534-6 standards. Action: Single acting, direct or reverse Travel range: Linear; 5...120 mm / 0.2...4.7 in Rotary; 30...160 degrees. Environmental influence Standard temperature range: -40° to +85 °C / -40° to +185 °F Influence of temperature on valve position: Rotary, 0.5 % /10 °C Linear, 0.1 mm /10 °C Temperature cycling/Dry heat: IEC 60068-2-2 Humidity limits: According to...

Open the catalog to page 3
NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 4

LOCAL USER INTERFACE The NDX Local User Interface (LUI) includes 4 capacitive touch buttons: Enter menu & select / accept value to change Move within menus & change values Buttons can be used with the cover installed or removed. When installing the cover make sure that the cover button symbols are at the same position as the symbols on the LUI module inside the device. User LUI access can be restricted to guarantee safe and secure process operation. Any user is always able to see all LUI information without restrictions (read only mode), but modification of settings or activating any local...

Open the catalog to page 4
NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 5

APPROVALS AND ELECTRICAL VALUES Approval: NDX1510_G-X__N0000 Electrical values Input: Ui ≤ 28 V, Ii ≤ 120 mA, Pi ≤ 1 W, Ci ≤ 22 nF, Li ≤ 100 μH. Output: Ui ≤ 28 V, Ii ≤ 120 mA, Pi ≤ 1 W, Ci ≤ 22 nF, Li ≤ 100 μH, external load resistance 0–690 Ω Input: Ui ≤ 28 V, Ii ≤ 120 mA, Pi ≤ 1 W, Ci ≤ 22 nF, Li ≤ 100 μH. Output: Ui ≤ 28 V, Ii ≤ 120 mA, Pi ≤ 1 W, Ci ≤ 22 nF, Li ≤ 100 μH, external load resistance 0–690 Ω Input: Ui ≤ 28 V, Ii ≤ 120 mA, Pi ≤ 1 W, Ci ≤ 22 nF, Li ≤ 100 μH. Output: Ui ≤ 28 V, Ii ≤ 120 mA, Pi ≤ 1 W, Ci ≤ 22 nF, Li ≤ 100 μH, external load resistance 0–690 Ω Input: Ui ≤ 28 V, Ii...

Open the catalog to page 5
NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 6

LINEAR APPLICATION ROTARY APPLICATION Position feedback magnet extreme POSITION FEEDBACK MAGNET FOR ROTARY ACTUATORS POSITION FEEDBACK MAGNET FOR LINEAR ACTUATORS

Open the catalog to page 6
NELES® INTELLIGENT VALVE CONTROLLER, SERIES NDX - 8

HOW TO ORDER INTELLIGENT VALVE CONTROLLER NDX PRODUCT GROUP Neles Intelligent Valve Controller Series NDX 2 PNEUMATIC ACTION PNEUMATIC CAPACITY FAIL ACTION Compact - Aluminum with Composite Cover 6 COMMUNICATION / INPUT SIGNAL RANGE HART / 4-20 mA and 4-20 mA Position Transmitter 7 TEMPERATURE RANGE GLOBAL APPROVALS FOR HAZARDOUS AREAS LOCAL APPROVALS FOR HAZARDOUS AREAS PNEUMATIC CONNECTIONS & GAUGES 1/4 NPT without gauges (no block, no gauges) 1/4 NPT with gauges (block with 1/4NPT threads + gauges) G1/4 without gauges (block with G1/4 threads) G1/4 with gauges (block with G1/4 threads +...

Open the catalog to page 8

All Metso Automation catalogs and technical brochures

  1. STGVA - STHM

    8 Pages

  2. Vasa HD

    4 Pages

  3. Holo-Flite®

    8 Pages

  4. HGMS cyclic

    5 Pages

  5. HGMS

    12 Pages

  6. HGMF

    8 Pages

  7. LIMS iron ore

    12 Pages

  8. IPS LTK

    1 Pages

  9. Tube press

    8 Pages

  10. Ball mills

    2 Pages

  11. HRC 800

    8 Pages

  12. Actuator

    2 Pages

  13. Chlorine

    4 Pages

Archived catalogs

  1. SmartLX

    6 Pages