With the innovative Valvcon V Series,Metso Automationpioneered the concept of plug-in,modular electronics in valve automation.This concept redefined and simplified the entire valve actuation processupgrades and modifications can now be done in the field,in a matter of minutes,with no hard wiring, soldering or factory returns.For years,the V Series has set the standard for high quality,rugged and reliable electric actuators.Metso Automation uses its proven technology to vastly simplify actuator set-up andcalibration and to enhance actuator performance.V Serieselectric actuators are designed to...

(Order Code C)The add-on Control Board allows control from either 4-20mA or 0- 10VDC (or 2-10VDC) control signals.This board also provides:position feedback (4-20mA or 0-10VDC)Օlocked rotor/stall protection speed control for slower cycle timesՕadjustable dead band (sensitivity to signal changes)on-board supervisory control via push buttons Օselectable pre-set response to loss of control signal (fail to zeroor fail last position)reverse acting operation with no wiring changes requiredՕsplit range operation (Order Code J) The Speed Control feature solves the problem of the valve openingtoo quickly...

MOTOR BOARD WIRING TERMINAL 6 CW LIMIT(LINE VOLTAGE OUT)TERMINAL 5 CCW LIMIT(LINE VOLTAGE OUT)TERMINAL 4 CW AC HOT (MUST CONNECT) TERMINAL 3 CCW AC HOT (MUST CONNECT) TERMINAL 2 AC COMMON (MUST CONNECT) CAUTION: Valvcon AC voltage actuators use reversing inductionmotors which cause high voltages. TERMINAL 1 AC HOT(FOR HEATER OPTION) Devices connected toterminal 3 and to terminal 4 must be rated for a minimum 250VAC (550VAC for 230VAC applications). Due to theinduced feedback voltage,multiple actuators can not be wiredin parallel.Separate (isolated contacts) must be provided foreach actuator....

Board Options* C Control Board J Speed Control Timer Board U ISO Readback Board > Other Options Weathertight (NEMA 4/4X) H > 1 Tropical Heater/Thermostat > 2 WX Weathertight & Explosionproof (NEMA 4/4X/7 & 9) I ISO 5211 Compliant Output K Brake > Torque (in lbs)150 P Feedback Potentiometer S2 2 Additional Limit Switches 150 T > 3 Heater/Thermostat 300 300 600 600 Z Handwheel 1000 1000 1500 1500 > Operating Voltage 2000 2000 N115AC 115VAC 2500 2500 3000 3000 N230AC 230VAC * Select only one board option as needed.1This heater option activates at or below 90F and deactivates at110аF;it is recommended...