Thermal Processor Expect results

Holo-Flite® Thermal Processor Holo-Flite® is an indirect heat exchanger utilizing a hollow screw for heating, cooling or drying bulk solids, filter cakes, pastes or sludges. Metso has over 60 years experience in the application design and manufacturing of indirect heat exchanger systems and components. The HoloFlite® is a proven and efficient thermal processor with over 3,000 installations worldwide. Process principle In the Metso Holo-Flite® processor, individual particles are heated or cooled as they come in contact with the surfaces of the hollow flights, shaft and trough. The product to be...

Process advantages Operating advantages Eliminates product contamination • Heat transfer agent does not come in contact with the product Patented Twin Pad screw design • Screw speed and temperature can be changed to accomodate variations in material throughput and thermal ­ equirements r Highest thermal efficiency • Heat transfer agent is continuously recycled ­ Flow of heat transfer agent can be co-current or counter-­ urrent c to the flow of material Low horsepower requirements Mechanical simplicity Continuous operation Holo-Flite® configurations Economical operation • Lower power consumption...

Laboratory and rental services Metso can test your product on both a preliminary feasibility or on a full-scale production basis with either a lab-size unit or a production-size Holo-Flite®. We can perform heating, cooling, drying, cooking and solvent evaporation tests quickly and accurately with your samples. Metso can also provide Holo-Flite® rental units for in-plant testing. The units come with self-contained electrical hot oil heater. All rental units are complete with vapor dome and variable speed drive and are on skids for ease of shipment and installation. Applications Chemical processing...

Holo-Flite® screw construction specifications Front flight Conveys material continuously through the HoloFlite® processor. Hollow stempipe Seamless, heavywalled pipe. Back flight The jacketed portion of the flight allows the heat transfer agent to circulate through the flights. Rotary joint Allows screw to rotate while providing a seal to stationary piping. Siphon tube Allows inlet and outlet heat transfer agent to move through the same end of the screw. Block plate Prevents intermixing of inlet and outlet heat transfer agent. Shaft Extends through the trough housing and is supported by bearings....

Heater skid Holo-Flite®

Life Cycle Service Metso offers replacement parts to keep your machine running properly. By having qualified representatives at the office and in the field, we can predict worn screws to keep optimum performance. Note: The inlet and outlet can be opposite ends to those shown Note: The inlet and outlet can be atat opposite ends to those in shown in the Where required, required, the processor can the drawing. drawing. Where the processor can be incllined up to be inclinedhorizontal.50 the horizontal. 15° to the up to 15o D 12 10 – D 12 10– 55 Unit SizeUnitType Designation: & size & type designation:...

• Metso Minerals Industries Inc. 350 Railroad Street, Danville, PA 17821-2046, USA, Phone: +1 570 275 3050, Fax: +1 570 275 6789 • Metso Minerals Industries, Inc. 2715 Pleasent Valley Road, York, PA 17402, USA, Phone: +1 717 843 8671, Fax: +1 717 845 5154 • etso Minerals (South Africa) (Pty) Ltd. M Private Bag X2006, Isando, Johannesburg,1600, South Africa, Phone: +27 11 961 4000, Fax: +27 11 397 2050 • Metso Minerals (Australia) Ltd. Level 2, 1110 Hay Street, West Perth, WA 6005, Australia, Phone: +61 8 9420 5555, Fax: +61 8 9320 2500 • Metso Minerals (India) Pvt Ltd 1th floor, DLF Building...