video corpo

HGMF

HGMF

HGMF

Product catalog summary
Overview: The SALA-HGMF® High Gradient Magnetic Filter is designed for high-efficiency removal of iron and copper corrosion particles from condensates, as well as cleaning oils and glycols from sub-micron iron particles. It maintains efficiency under heavy contamination and varying flow rates, suitable for large water circuits up to 10,000 m3/h.
Key Features:
  • Increases thermal efficiency by reusing hot condensates for high-pressure boilers.
  • Removes high levels of iron and copper during startups and upset conditions.
  • Treats hotter condensates than resin polisher systems can handle.
  • Reduces iron and copper buildup in boilers, extending cleaning intervals.
  • Decreases fuel requirements and enhances boiler reliability.
Performance: The filter can operate alone or with additional polishing steps, achieving acceptable feed water quality for high-pressure boilers. It handles a wide range of flow rates and maintains high efficiency even with heavily contaminated and hot condensates.
System Components: The system includes a filter assembly, DC power supply, valves, piping, tanks, instrumentation, and an automatic process controller. It is shipped fully assembled and ready for installation.
Operation: The filter uses a magnetized filamentary matrix within a pressure vessel to capture iron and copper oxides. It features a low differential pressure drop and a large holding capacity. The system automatically triggers a flush cycle based on pressure increase or time elapsed.
Control System: Managed by a PLC connected to a PC screen, allowing operators to monitor and control operations, settings, statistics, and alarms.
Applications: Suitable for pulp and paper mills, power generation plants, nuclear power plants, steel mills, powder metallurgy plants, breweries, district heat water plants, solar cell production, and galvanizing rolling plants.
Technical Specifications: The document provides detailed dimensions, power requirements, and performance rates for various models, highlighting the filter's adaptability to different industrial needs.
See more

Catalog excerpts

HGMF-1

High gradient magnetic filter Proven highest efficiency

 Open the catalog to page 1
HGMF-2

High gradient magnetic filter systems The SALA-HGMF® High Gradient Magnetic Filter provides proven highest efficiency in removing iron and copper corrosion particles, from condensates as well as cleaning oils, glycols, etc. from sub micron iron particles. The filter maintains this efficiency even during heavy contamination and with varying flowrates. Stable levels of iron and copper concentrations is maintained in large water circuits like 10,000 m3/h. The filter can: • Increase thermal efficiency by reusing more hot condensates of feed water quality for high pressure boilers. • Remove high levels...

 Open the catalog to page 2
HGMF-3

SALA-HGMF® for control of magnetite concentration in a district heat flow of 10.000 m3/h. Using the SALA-HGMF filter The filter will: • Increase thermal efficiency by reusing more hot condensates of feed water quality for high pressure boilers. • Remove high levels of iron and copper from condensates during startups and upset conditions. • Treat condensates hotter than those accepted by resin polisher systems. • Decrease losses in condensate and heat values during production upsets. • Reduce iron and copper buildup rates in boilers. • Increase time spans between boiler cleanings significantly....

 Open the catalog to page 3
HGMF-4

IFILTER VESSEL! . Denotes interface boundary a filamentary matrix filter bed contained within a pressure vessel. When the conden- sate flows through the filter bed, the particu- late iron and copper oxides are captured and held magnetically in the filter bed until the matrix must be small to create the high mag- netic field gradients necessary to capture weakly magnetic corrosion particles, like hematite and hydrated iron oxides, in addition to the strongly magnetic particles. void volume of approximately 90 percent. Therefore, when operating, the filter has a low differential pressure drop -...

 Open the catalog to page 4
HGMF-5

High gradient magnetic filter systems 5

 Open the catalog to page 5
HGMF-6

Smart automatic control system The magnetic filter is controlled by a system consisting of a PLC connected to PC screen, built in a well sealed and insulated cabinet. All control logics are implemented in the PLC. On the PC monitor the filter operator can follow and control the filter operation and information such as settings, statistics and alarms. Control cabinet 6 High gradient magnetic filter systems

 Open the catalog to page 6
HGMF-7

Applications Viscous media like oils, glycols etc.: Filter benefits: Industrial references; Performance rates: • Pulp and paper mills The SALA-HGMF® can polish mill condensates at typical flow velocities of 700 to 1200 m/h (300 - 500 USGPM/ft2. And, with increased pressure differential – delta P – across the filter system, even higher flowrates can be treated at similar high performance levels. • Power generation plants • Unmatched filtration rates • Remove iron particles from viscous media. • Drainage of media before filter cleaning minimizes media losses. • Nuclear power plants • Steel mills...

 Open the catalog to page 7
HGMF-8

• Metso Minerals Industries, Inc. 2715 Pleasent Valley Road, York, PA 17402, USA, Phone: +1 717 843 8671 • etso Minerals (South Africa) (Pty) Ltd. M Private Bag X2006, Isando, Johannesburg,1600, South Africa, Phone: +27 11 961 4000, Fax: +27 11 397 2050 • Metso Minerals (Australia) Ltd. Level 2, 1110 Hay Street, West Perth, WA 6005, Australia, Phone: +61 8 9420 5555, Fax: +61 8 9320 2500 • Metso Minerals (India) Pvt Ltd 1th floor, DLF Building No. 10, Tower A, DLF Cyber City, Phase - III, Gurgaon - 122 002, India, Phone: +91 124 235 1541, Fax: +91 124 235 1601 • Metso Perú S.A. Calle 5 Nro. 144,...

 Open the catalog to page 8

All Metso Automation catalogs and technical brochures

  1. STGVA - STHM

    8  Pages

  2. Vasa HD

    4  Pages

  3. Holo-Flite®

    8  Pages

  4. LIMS dry drum

    4  Pages

  5. HGMS cyclic

    5  Pages

  6. HGMS

    12  Pages

  7. LIMS iron ore

    12  Pages

  8. IPS LTK

    1  Page

  9. Tube press

    8  Pages

  10. Ball mills

    2  Pages

  11. Apron feeders

    8  Pages

  12. HRC 800

    8  Pages

  13. Actuator

    2  Pages

  14. Chlorine

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.