Normal stock unit Temperature range Test voltage Insulation resistance 100-m ring -20°C to + 80°C. approx. 2.5 times the operating voltage for PVC-insulated cores > 20 MQ X km Technical data Conductor resistance in Q/km at 20°C (specified for 1-core cables, slightly higher for multi-core cables) 0.08 mm2 = 236 Q 0.50 mm2 = 40 Q NF 1 Shielded, PE-insulated cable, especially for microphones, recording heads, dictation devices Conductors: plain Cu strands 10 x 0.10 mm = 0.08 mm2, insulated with transparent PE to 1.6 mm 0. Cable structure: the PE core is shielded by twisted plain copper wires. Up of the shield is 0.40 mm2, coverage > 90%. The final layer is formed by the silver-grey PVC jacket. Capacitance: core/shield approx. 80 pF/m. Operating voltage: max. 350 V~ NF 4 Device connection cables and control signal cables with full shielding (sym. microphone connection) Conductors: plain Cu strands 10 x 0.10 mm = 0.08 mm2, insulated with PVC to 1.0 mm 0 (colours white, brown). Cable structure: 2 cores are twisted to a pair; shielded by braided, plain copper wires. Up of the shield is 0.65 mm2, coverage > 80%. The final layer is formed by the silver-grey PVC jacket. Capacitance: core/shield, shield earthed. 100 pF/m. Operating voltage: max. 250 V~ NF 5 Individually shielded, low-capacitance diode cables (flat splittable cable) Conductors: plain Cu strands 10 x 0.10 mm = 0.08 mm2, insulated with PE to 1.6 mm 0 (colours red, yellow), shielded by twisted plain Cu wire. Cable structure: the two individually shielded cores run parallel and are covered with a silver-grey PVC jacket in a manner allowing easy separation of the cores. dp of the shield is 0.32 mm2, coverage > 90%. Capacitance: core/shield approx. 80 pF/m. Operating voltage: max. 350 V~ NF 6 Individually shielded, low-capacitance microphone cable for stereo audio applications Conductors: plain Cu strands 10 x 0.10 mm = 0.08 mm2, insulated with PE to 1.3 mm 0 (colours wh, ye, br, gn), shielded by twisted plain Cu wire. Cable structure: 4 individually shielded cores are twisted to a cable and covered with a grey RAL 7001 PVC jacket. pH of the shield is 0.3 mm2, coverage > 90%. Capacitance: core/shield approx. 90 pF/m. Operating voltage: max. 250 V~ Structure of the cablesNet price including copper Core insulation / jacket insulation Number of cores Cross-section of one core Total 0 approx. 100 m weighs approx. On-time . Fast • Reliable On-time . Fast • Reliable 142 143