Technical data Net prices including copper Produced in the same way as the harmonised high voltage cables (see pages 136 + 137). The cable is additionally wrapped in overlapping transparent polyester foil and shielded under the outer jacket (light grey RAl 7032) with tinned braided copper wires (24 x 7 x 0.15). Preferred application As connection and control signal cables for relocatable devices in toolmaking machines, electronic systems and control and regulation systems. Special feature Protected by the braided shield from external interference. Sample quantities under 100 metres Construction data 0.75 mm2 = 24 x 0.20 mm plain and insulated with coloured PVC. 1.00 mm2 = 32 x 0.20 mm plain and insulated with coloured PVC. 1.50 mm2 = 30 x 0.25 mm plain and insulated with coloured PVC. Core colours: 2 cores = brown + blue 3 cores = brown + blue + green/yellow 4 cores = brown + grey + black + green/yellow 5 cores = brown + blue + grey + black + green/yellow Twisting, shield and jacket 2 to 5 cores are twisted together, wrapped in overlapping transparent polyester foil and shielded over the foil with braided, tinned copper wire. The outer jacket is of PVC, light grey as per RAL 7032. Electrical and thermal properties at 20°C 0.75 mm21.0 mm21.5 mm2 Conductor resistance: max. 26 Q / km max. 19.5 Q / km max. 13.5 Q / km Current rating: max. 10 A max. 11.5 A max. 16 A Insulation resistance for all cables: greater than 20 MQ x km Capacitance in pF per metre at 1 kHz a) Core/core, shield earthed (other cores free) 0.75 mm2: 45 pF 1.0 mm2: 50 pF 1.5 mm2: 55 pF b) Between one core and the remaining cores, shield earthed 0.75 mm2: 120 pF 1.0 mm2: 130 pF 1.5 mm2: 130 pF b) Between one core and the remaining cores + shield 0.75 mm2: 200 pF 1.0 mm2: 200 pF 1.5 mm2: 210 pF Inductance at 1 kHz approx. 0.2 mH/km Rated voltage 2-4 core = max. 300 V, 5 core = max. 300 V between an outer conductor and the protective conductor Test voltage 2,000 V (core/core), 1,500 V (core/shield) Temperature range -10°C to + 80°C (installation and operation) -30°C to + 80°C (transport and storage) Explanation of the designations N Yn) L H C Y Cable is standardised Not standardised but produced according to the requirements of the standardised cable PVC insulated cores Light version / M Medium version For relocatable installation Braided, tinned full shield PVC jacket Shielded high voltage cables 1.0 mm2 8.9 7.5 2.6 Shielded high voltage cables 1.5 mm2 11.2 9.0 Normal stock unit: 100-m ring. Short sample (20 cm) free of charge. * I t e m s t o b e s o l d o f f Jacket grey RAL 7032