Proximity Transmitters PROXIMITY PRODUCTS TXR5521 RPM Transmitter Combined Probe Driver & Signal Conditioner for RPM or Phase Reference Features • • • • 4-20 mA proportional to shaft RPM Sensing to 177°C with PP Series Probe Dynamic output for vibration phase reference used in analysis Full scale range from 5 RPM to 300,000 RPM The Model TXR5521 is a 2-wire transmitter operating on a nominal power of +24 Vdc. The unit operates with an eddy current proximity probe to sense a keyway or gear teeth on a rotating shaft and provides a 4-20 mA output proportional to shaft RPM. The transmitter is factory preset by complete model number. The full scale RPM can be set from 5 to 300,000 RPM and pulses/revolution set from 1 to 99. The minimum RPM resolution is a function of the number of pulses/revolution: the number of pulses per revolution times the maximum RPM desired must be less than or equal to 300,000. Specifications Function: Loop powered transmitter operates with a non-contact proximity probe/cable to convert shaft rotation in revolutions per minute (RPM) to a proportional 4-20 mA output signal. Probe Gap: 1.25 mm [50 mils]. Temperature Limits: -40° to 85°C Isolation: 500 Vrms, circuit to case Proximity Probe/Cable: Available for any standard probe cable combination, Can be factory-calibrated for any probe and/or cable. Pulses/Revolution: 1 to 99 pulses/ revolution (300,000 pulses/minute maximum). See How To Select for factory preset options. RPM Range (4-20 mA output): From 5 to 300,000 RPM. See How To Select for factory preset options. Loop Supply Voltage (Vs): 17 volts to 30 Vdc Standard Target Material: 4140 steel shaft keyway or gear teeth. Custom calibration available for other materials, please consult factory. Test Output (AC & DC): Access: Via terminals and BNC Isolation: 10K ohm from 4-20 mA loop Sensitivity: 7.87 mV/micron (200mV/mil) Maximum Load Resistance (RL): RL=50 x (Vs -17.0) Ohms Housing: Polymer internally coated for RFI/EMI protection. Hazardous Area Ratings: • CSA Certified: Intrinsically Safe Class I, Div 1, Grps A, B, C & D, Temp Code T4. • CSA Certified: Non-Incendive Class I, Div 2, Grps A, B, C & D • BASEEFA Certified: Intrinsically Safe Ex ia IIC T4, Non-Incendive Ex ia IIC T4 Typical Application Diagrams (probe shown only) TYPICAL GAP 1.25 mm ±250 uM (50 mils ±10 mils) PROBE 12 TOOTH GEAR = 12 PULSES/REVOLUTION 1.24 www.metrixvibration.com • [email protected] • Tel: 281-940-1802 • Fax: 713-559-9421 • 1/11

Proximity Transmitters TXR5521 RPM Transmitter PROXIMITY PRODUCTS Weight & Dimensions Dimensions in mm [inches] Optional Base: P/N 9647 Weight = 0.6 pounds How to Select TXR5521 - A B D 0 Probe Series System Length* 72 = 10000/7200 5 = 5 meter or 9 = 9 meter 33 = 3300 5 = 5 meter or 9 = 9 meter 39 = NSv 3309 30 = 3000 C 5 = 5 meter or 7 = 7 meter 1 = 15 feet or 2 = 20 feet *Custom lengths available, please contact factory - Tip Configuration EE - No. of Keyways 0 = 5 or 8 mm Tip applies to all 7200, 3300 and 3309 systems 1 = 0.190 Tip for 3000 series only 2 = 0.300 Tip for 3000 series only 01...