Accelerometer SA6200A Industrial Accelerometers SA6200A - General Purpose 2 Pin Threaded Connector • High accuracy and repeatability yet priced within budget • Eliminate wiring polarity errors with our patented Independent Polarity Terminals (IPT®)1 • Eliminate false indications caused by high frequency noise rectified as low frequency using patented anti-ski slope technology ATEX Notes: 1. IPT (Indepent Polarity Terminal) is a registered trademark of Metrix Instrument Co. Applications • • • • • • • • • 2.02 Motors Gear Boxes Paper Machines Process Pumps Fans Rotor Blade Pass Sensing Turbocharger Engine Vibration Cooling Tower Fans Engines Capable of sensing a wide range of vibration frequencies, these accelerometers are ideal for use on a variety of machines. A builtin amplifier provides a high level, low impedance output, which is the industry standard. It consists of a temperature stabilized piezo-electric sensor and an amplifier packaged together in a stainless steel case, from which the sensing circuit is electrically isolated. A choice of mounting styles is available. www.metrixvibration.com • [email protected] • Tel: 281-940-1802 • Fax: 713-559-9421 • Rev D

Accelerometer SA6200A Industrial Accelerometers Specifications Weight & Dimensions ELECTRICAL CONNECTOR 5/8-24 UNEF - 2A 2 PIN (MIL-C-5015) SHOWN Dynamics: Accuracy: 2% (Repeatability) Sensitivity (±5%): 100 mV/g Frequency Response: 2 to 5 KHz (± 5%) 1.5 Hz to 7.5 KHz (±10%) 0.7 Hz to 10 KHz (±3dB) Resonant Frequency: 13 KHz Cross Axis Sensitivity: <5% Measurement Range: 50 g Resolution: 0.002 g Weight: SA6200A - 91 gm (3.1 oz) Dimensions in mm [inches] NOTE: *Connections are non polarity sensitive (IPT®). Ordering Options A B C SA6200A A 1 Hazardous Area Certification 1 = CSA intrinsically safe*...