Monitor SM6100 Vibration Monitor w/ EP Housing Single Channel Monitor Explosion-proof Housing with Optional Display Shown w/optional display This single channel vibration monitor is a versatile instrument for protection against excessive vibration. In its standard configuration, the SM6100 is an economical single set point vibration monitor loaded with standard features and packaged in an industrial grade housing. Fully configured, the SM6100 provides dual setpoint for machine protection with optional LCD readout, real time remote operator interface via 4-20 mA and an external BNC (weather-proof only) for easy analyst access to the buffered dynamic vibration signal. Optional hazardous area certifications. Typical sensor (Not included) Optional BNC Typical Installations Optional external reset A ccelerometer Sensor* & Cabling* Machinery Skid Terminal Box* (for long cabling) Available on ordinary locations only Features • Low cost protection system • Weatherproof/optional explosion-proof rated • Single or optional dual setpoint • Velocity or displacement units • Adjustable trip delay • Setpoint test feature • Buffered, dynamic vibration signal output for analysis option Applications • Centrifugal Pumps • Reciprocating Compressors • Centrifuges • Cooling Towers • Gas Turbines • Electric Motors • Natural Gas/Diesel Engines SM6100 Vibration Monitor Power In, Switch Out *Ordered separately User Wiring Diagrams Fully Optioned (LCD not shown) Note: For additional savings, see SW Series electronic switches (pg 4.07) with integral sensors for monitored points with temp <70 0C. www.metrixvibration.com • [email protected] • Tel: 281-940-1802 • Fax: 713-559-9421

Monitor SM6100 Vibration Monitor w/ EP Housing Specifications Output Sensitivity vs Temperature: Less than .05%/°C (calibrated at 25°C) Input Power: Nom. 115 VAC, 95 to 125, 50/60 Hz Nom. 230 VAC, 190 to 250, 50/60 Hz Nom. 24 VDC, 20 to 28 Galvanic Isolation: 500 VDC or peak from power to circuit Buffered, Dynamic Signal Output: Sensitivity: Output identical to the sensor input. Field Wiring: Maximum wire gauge: 14 AWG, Wire clamp type screw terminal block 500 Vrms isolation from circuit Housing: Cast aluminum. Weatherproof. Environmental Rating: NEMA 4, IP 65 Electromagnetic Compatibility: Optional,...

Monitor SM6100 Vibration Monitor w/ EP Housing Ordering Options SM6100 - A D Limits & Display 1 2 3 4 = = = = B C - D E F Certifications / Local Reset Options Without Display = one limit, triac = two limits, triacs = one limit, FET = two limits, FETs 5 6 7 8 A 2 = CSA, NRTL/C, Class I, Div 1, Grps B-D 3 = CSA, NRTL/C, Class I, Div 1, Grps B-D w/ external reset 4 = CE & ATEX EEx d IIB + H2 T4 5 = CE & ATEX EEx d IIB + H2 T4 w/ external reset 8 = No approvals 9 = No approvals / with external reset With Display one limit, triac two limits, triacs one limit, FET two limits, FETs Note: Use triacs...