Proximity Products PROXIMITY PRODUCTS 5533 Probe Driver Weight & Dimensions DIN-rail Mount Available 79.2 (3.12) Dimensions in mm [inches] 50.8 (2.00) 50.8 (2.00) *Proximitor is a registered trademark of Bently Nevada Co. Specications Standard Target Material: AISI 4140 Steel. If other material used, contact factory. Power: -18 VDC to -26 VDC, 8-10 mA (nom.) Sensitivity: -8 mV/um (-200mV/mil), +/- 5%, -4 mV/um (-100mV/mil) for 11 mm probe Non-linearity: maximum .015 mm (0.6 mils) departure from straight line over 2.0 mm (80 mil) range @ 22o C (for 5 & 8 mm tip dia.). For 11 mm probe driver: 4.0 mm (140 mils) range at 22o C, 20 to 160 mils Frequency Response: 0-10 KHz, +/- 5% Temperature Limits: -51o C to +100o C Isolation: 500 Vrms, circuit to ground Interchangeability Error: Maximum 8.5% change in sensitivity when probe, cable and/or driver are randomly interchanged. Housing: VALOX® polymer with internal RFI/EMI spray shielding potted for long life. Hazard rating: Intrinsically safe CSA certied for Class I, (Grps A-D) and CENELEC certied EEx ia IIC T3 when connected to a Series probe and cable and wired with an approved barrier. All Metrix drivers have third party approvals as standard. *VALOX is a registered trademark of GE. 37 (1.46) 60.5 (2.38) 49.3 (1.94) ATEX Metrix proximity drivers are solid performers for the last decade, whether for new installations or as direct replacements for the Bently Nevada ProximitorTM 7200 & 3000 Series. NOW we offer direct replacements for the 3300 Series with added features of a Valox housing and BNC jacks for local data collection or analysis. Metrix proximity transducers are fully compliant with API 670 specications and third party approvals are standard. The baseplate mounting holes are identical (requiring no eld backplate drilling) DIN rail mounting is optional. 1.18 Weight: 0.5 kg (1.1 lb) DIN-rail How To Select NEW INSTALLATION 1) Use the Model 5533 in the appropriate system length and mounting preference. Metrix Model number form for 10000 series transducers MODEL 5533 System Length Mounting Baseplate = 0 35 mm DIN-rail = 1 0 3 = 5 meter system 0 4 = 9 meter system REPLACEMENTS 2) If replacing an existing Bently Nevada Proximitor®, add the prex MX to the model number of that driver and add the sufx - 0 (if baseplate or - 1 if DIN rail mount required. 3) Contact your nearest Metrix sales ofce or factory for price and availability Metrix Model number form for MX series transducers Add Prex MX for 3300 series: BNC Model No. ** MX 330100- XXX MODEL Add Prex MX for 3300 XL series: for 3309 NSV series: MODEL MX MODEL MX BNC Model No. *** Add Mounting* - X Add Mounting* 330180- XX-XX - X 330980- XX-XX - X Notes: * Add Mounting -0 if baseplate;-1 if DIN rail (MX baseplate mounting holes the same) ** -XXX Designates system length. Ex: 090 = 9 Meters, 015 = 15 feet *** First -XX = system length; second -XX = approvals (-00 = none; -05 = yes) Calibrated to 4140 SS System. Please advise factory if other material is used. www.metrix1.com • [email protected] • Sales & Service Tel: 281-940-1802 • Fax: 713-559-9421 • 03/10

Proximity Products 5533 Probe Driver Proximity Probe Drivers for the 7200 series Tip Dia. Mounting 5 mm- 0 = Baseplate 8 mm 1 = 35 mm DIN-rail System Length Used with 03 = 5 meter system 04 = 9 meter system 10001-10008; 10026 & 10030 5533 Tip Dia. Mounting 11 mm PROXIMITY PRODUCTS Agen 5533 - System Length 13 = 5 meter system 14 = 9 meter system 0 = Baseplate 1 = 35 mm DIN-rail Used with 10037 - 10042 Proximity Probe Drivers for the 3300 series MX330100 MX330180 - cy Ap p Stan roval is dard on al l driv ers here! listed . . . . Note: driver mtg. holes are 2”x2” replacing 2”x1.75” For 3300 series...