Proximity Sensor Signal Conditioners PROXIMITY PRODUCTS 5510 (Radial Vibration) & 5516 (Position/Thrust) Specifications Features Convert proximity transducer system to a transmitter for connection to a PLC or DCS. Replace older monitor racks incrementally at low cost. • Easiest conversion of obsolete monitor racks on the market today • Powers Metrix drivers or Bently Nevada Proximitors* • Gives 4-20mA output proportional to vibration or position • Dynamic signal is available at the signal conditioner or remotely PC Series Input Power: 18-30 VDC, 60 mA Probe Driver Power Provided: -24VDC * Input Signal: -8 mV/um (-200 mV/mil) from a proximity probe driver Frequency Response (5510): 5 Hz-10 KHz Test Output (AC & DC): -8 mV/um (-200 mV/mil), buffered 4-20 mA (Source) Output: Proportional to shaft radial vibration (5510). 4-20 mA proportional to shaft axial position (5516). Sensor Malfunction: Output current driven below 3.6 mA and LED indicates either probe/cable not OK or probe gap is outside the linear range. Max. Load Resistance (Rl): 600 ohms Max. Current Draw: 40 mA Full Scale Output Range (20 mA): See How To Select. Isolation: 500 V, circuit to case Temperature Limits: -51oC to +100oC Housing: Polymer internally coated for EMI protection. 35 mm DIN-rail available. Electromagnetic Compatibility: CE mark *Note: Proximitor is a registered trademark of Bently Nevada. Weight & Dimensions Weight: 0.5 kg (1.1 lb) Height: 69.9 (2.75) max. (with DIN-rail) Dimensions in mm [inches] How To Select 1) Verify Probe Driver is -8 mV/um (-200 mV/mil) and note -VDC required. 24 Vdc is standard. For 18 Vdc, add -18V to end of model number (see example). 2) Choose Model 5510 or 5516, desired 4-20 mA range and mounting style: 5510C - Radial Vibration 5510C - A 0 1 0 1 0 0 0 0 1 1 2 2 5516C - Example (-24 Vdc): 5510C- 001- 24V Vibration Range (4-20 mA) / Mount A 5516C - Position (Thrust) Vibration = 0-5 mils (125 um), pk-pk/Base = 0-5 mils (125 um), pk-pk/DIN-rail = 0-10 mils (250 um), pk-pk/Base = 0-10 mils (250 um), pk-pk/DIN-rail A Example ( -18 Vdc): 5516C- 001- 18V Vibration Range (4-20 mA) / Mount A 0 1 0 1 0 0 0 0 1 1 2 2 = ± 30 mils (± 750 um) Baseplate* = ± 30 mils (± 750 um) DIN-rail* = ± 40 mils (± 1000 um) Baseplate = ± 40 mils (± 1000 um) DIN-rail *not available with 18 Vdc option 1.26 www.metrixvibration.com • [email protected] Sales & Service Tel: 281-940-1802 • Fax: 713-559-9421 • 06/10

Proximity Products Wiring Diagrams & Installation Tips 5533 Driver & 5510/5516 Signal Conditioner PROBE EXTENSION SYSTEM LENGTH probe - 200 mV/mil SIG COM -VDC PROBE DRIVER METRIX +24 VDC PC SERIES COM 5510 OR 4-20 mA 5516 PROXIMITY SENSOR SYSTEM PLC OR DCS 300 M Trendsetter TXR/TXA Proximity Transmitters PROXIMITY PRODUCTS zz + - PROXIMITY TRANSMITTER SYSTEM COMPONENTS SYSTEM LENGTH (5 or 9 m) PT5521 Loop-powered RPM Transmitter PT5521 TRANSMITTER (5 or 9 m) + 24 VDC SIGNAL OUT PROBE EXTENSION CABLE 4-20 mA COM TEST PROBE 100 mV/MIL 100 mV/MIL PLC OR DCS 3 m (10 FT) MAX. www.metrixvibration.com...