3000 Series Probes
2Pages

Proximity Products PROXIMITY PRODUCTS Replacements for 3000 Series Transducers The older 3000 Series proximity transducers have “system lengths” in feet (15 ft. or 20 ft.) not meters and must match the driver “system length”. However, the probes and cables are measured in inches. The probe physical length in inches is doubled and matched to the extension cable for the “system length”. For your convenience, see the table of standard probe & cable lengths beneath the Extension Cable listing on this page. All proximity transducers have third party approvals, comply with API 670 Specications, and feature ProxMatchTM component coding to assure proper matching of components. SEISMIC PRODUCTS *Probe length includes probe body AND pigtail For tip dia. 0.190” 0.300” 0.190 or 0.300 models) 0.190” 0.300” 0.300” 0.190” 0.190” 0.300” 0.300” 1/4”-28 1/4”-28 3/8”-24 3/8”-24 M8X1 M8X1 M10X1 M10X1 02 No Yes No Yes No Yes No Yes Case Length Model No. Unthreaded Length 10009 10010 10014 10015 Standard 00 = 0.0 in. Increments 05 = 0.5 in Maximum =.Case Length minus 1.0 in. 10012 10013 10017 10018 Standard 00 = 00 mm. Min: 02 = 20mm Increments Std: 07 = 70mm 01 = 10 mm Max: 25 =250mm Maximum =.Case Length minus 20 mm. Min: 10 = 1.0in Delta: 05 = .05in Std: 30 = 3.0in Max: 95 = 9.5in Even increments only. Metrix Model No. 02 10009 10014 - Tip Case Armor Diameter Threads 0.190” EXTENSION CABLE for 3000 Series (use with either probe length case length unthreaded Standard Proximity Probe Model No. 7386-01/2789 7386-01/4454 Probe Length (inches) 06 = 6 12 = 12 18 = 18 24 = 24 30 = 30 36 = 36 must exceed case length by 4.75 in. min. C o n n e c t o r Use a standard straight-through threaded probe above or the reverse mounted probe and “stinger” below depending on availability of the target Reverse Mount Proximity Probe Model No. 10027 Case Threads 3/8”-24 04 02 Unthreaded Length Case Length unthreaded -04 02 = 0.2 in. 12 = 1.2 in. Armored For Probe Length Cable Length for 15 ft. System Cable Length for 20 ft. System 6 inches 12 inches 18 inches 24 inches 30 inches 168 inches 156 inches 144 inches 132 inches 120 inches 108 inches 228 inches 216 inches 204 inches 192 inches 180 inches 168 inches 36 inches Special instructions for the 3000 Series only: The above table is for your convenience in selecting the correct cable length for the probes lengths listed. To nd cable lengths for probe lengths not listed, double the probe’s desired physical length in inches, and subtract that from either 180 inches (for a 15 ft. system) or from 240 inches (for a 20 ft. system) to get the correct extension cable length. Don’t blame us. We did not dream up this scheme. case length 12 Model No. probe length No armor 02 Probe Length (inches) 06 = 6 12 = 12 18 = 18 24 = 24 30 = 30 36 = 36 C o n n e c t o r Model 5499 IS REQUIRED for mounting reverse mount probes Standard electronic enclosures & special panels & cabinets Example transducer conguration Given: A 20 foot system, 3.0 in. case length 3/8-24 probe (0.300 tip dia. ,30 inches long, 0 in. unthreaded, no armor on probe, armored cable, driver w/DIN mount. Use: probe model no. 10014-00-00-30-30-02 extension cable 7386-01/4454-180 and driver 5533-108 ( -1 added for mounting option for DIN rail) 1.12 www.metrix1.com • info@metrix1.com • Sales & Service Tel: 281-940-1802 • Fax: 713-559-9421 • 11/09

Proximity Products Replacements for 3000 Series Drivers & Transmitters Proximitor, 3300XL, 3300XL NSv, 3309 NSv and RAM are registered trademarks of the Bently Nevada Corp. Driver “system length”, 15 ft. or 20 ft., not 5 or 9 meters as in other systems, must equal the combined probe & cable length. (See special cable-probe length combinations on previous page) PROBE DRIVER for 3000 Series Metrix Model No. - System Length 15 ft. 20 ft. Tip Dia. 0.190 0.300 Mounting 0 = Baseplate 1 = 35 mm DIN-rail 05 06 07 08 Radial Vibration 5510 Position Thrust 5516 Transmitters (loop-powered) include...