IC-FMS FLOW MONITOR The FMS is an industrial paddle wheel flow meter specifically designed for measuring the flow rate of liquids. The FMS display offers users an easy to read and control interface for Analogue 4-20mA (Flowrate) with a High or Low relay alarm output which can be configured for flowrate deviation or totalisation (Batch control), all packaged in a rugged stainless-steel body and enclosure. A variety of connection types, high pressures and temperature ratings make the FMS the ideal partner for a wide variety of general purpose, medical and industrial applications where good repeatability accuracy and a long service life are required. The display itself is a 36mm x 28mm backlit LCD screen, making it easily visible in dimly lit areas. It has 2 x 10 characters of text providing quick access to flowrate, totalisation and alarm status information. Flexibility is further enhanced with the option of a remote FMS display away from the flow meter when the meter location is in poor access area’s or in higher temperature applications. When the alarm is triggered the display flashes until the alarm setpoint has been exceeded. The alarm can be reset once the problem has been identified and resolved. Local or Remote Flowrate Totaliser 4-20mA Analogue Output Low / High Alarm Output Backlit LCD Display Easy to Install Suitable for the following market sectors: Oil & Gas Industrial & Energy Research & Development Power Generation Water & Waste water IC-FMS DISPLAY DATA SHEET Summary • Brand: METRI • Category: Flow Meters, Flow Switches • Liquids: Chemical, Clean Water, Dirty Water, Fuel & Oil, Slurry • Part ref: IC-FMS • IWN: FLO-171113 Features include: • Compact • Visual alarm • Local flow rate and totalizer indication • Resettable totalizer • Compatible with IC-LPM and IC-LTM

SPECIFICATION DETAILS Nominal size Process connection BSPP (parallel) and BSPT (taper) female threaded, DIN and ANSI flanged; other on request eg PNXX, ti-clamp, NPT, RJT Flange rating Solids free and partially contaminated liquids including water, chemicals, hydrocarbons, mineral oils, alcohols Flow range 05.5 to 1200 l/min, various range Operating temperature Max operating temperature Compact mount temps: Remote medium and high temps: All threaded bodies: Flanged bodies: Higher pressure rating on request Frequency range Pressure drop Varies with size, typically less than 125 mbar at maximum...

CONFIGURATIONS Ordering information for the IC-FMS Display IC-FMS Nominal size, flow range (based on H20 at 20°C) Other sizes and flow rates on request IC-FMS Remote-Screwed Meter BSPP (parallel) female BSPT (taper) female IC-FMS-Screwed Meter Other on request (eg. PNXX, tri-clamp, NPT RJT etc) General purpose Flow rate / totalizer 4-20mA & alarm output IC-FMS Remote-Flanged Meter Compact (locally mounted on flow sensor, excl. high temp version) Wall mounted, incl. bracket (up to 3m from sensor, please specify) Specify options ORDER CODE EXAMPLE IC-FMS IC-FMS DISPLAY DATA SHEET

Scope of Delivery The IC-FMS display is supplied as remote or fitted to IC-LPM paddlewheel and IC-LTM Turbine flowmeters. IC-FMS display is a Flow rate and Totaliser with 4-20mA and Relay output Alarm switchpoint that can be set as high or low anywhere in the flow range. Switch/Alarm adjustment - User settable The IC-FMS display internal A. Top left - Low / High alarm selection B. Top right - Totaliser reset C. Bottom left - set/run alarm switch D. Bottom right - alarm adjust potentiometer HIGH ALARM SCREEN Alarm hysteresis default is 2% of fullscale range High Alarm 50 L/M NORMAL SCREEN Model...