MI 3290 Earth Analyser EN
4Pages

{{requestButtons}}

Catalog excerpts

MI 3290 Earth Analyser EN - 1

High Voltage Insulation / Continuity / Earth NEW MI 3290 Earth Analyser is a portable, battery or mains powered test instrument with excellent IP protection (IP 54 open case), intended for measurement of earth resistance, specific earth resistance and earth potential of various energetic and non-energetic objects. The user can choose between different methods from classic 3 wire earth resistance measurement up to one or four clamp method for measurement of pylons. He has a choice of measurement methods with different frequency methods: single frequency or frequency sweep from 55 Hz to 15 kHz, HF method with 25 kHz and pulse method simulating the lightning strike. High electrical noise immunity makes this instrument best suited for industrial environment. Instrument is available in multiple sets which are a combination of different accessories and measurement functions. MEASURING FUNCTIONS • Earth Resistance 2,3,4 -pole; • Selective Earth Resist (1 x clamp); • Earth Resistance (2 x iron clamps); • Specific Earth Resistance (Wenner and Schlumberger method); • HF-Earth Resistance (25 kHz, acc. to IEEE_Std 81); • Earth Resistance of mono pylons with 10 m flex clamp; • Earth Resistance of multi-leg pylons with up to four flex clamps; • Current measurement (Iron, flex clamps); • Low Ohm measurement 7 mA and 200 mA; • Earth Potential; • Step and contact measurements; • Impulse Earth measurement 10/350 |js. KEY FEATURES • Possibility of performing all types of earth measurements with a single instrument. • Analysis of earth impedance as a function of the frequency due to a wide measurement frequency band (55 Hz ... 15 kHz). • Earth measurements on pylons with protective earth cable connected. • Measurement on mono towers and 4-leg tower. • A wide variety of measuring clamps: from iron clamps to flex clamps with 10 m length. • HF-Earth resistance measurement (acc. to IEEE_Std 81). • Sweep mode Z(f) on screen. • 3.4'' colour LCD display with touch screen. • Floating Mains (universal 90 ... 260 V AC) or battery powered (built in fast charger). • High degree of protection: IP 65 case closed, IP 54 case open. • Checkbox - different self-check methods. • DC resistance measurements. • Impulse impendance measurement for simulating the lightning strike. • Support for single or automated measurements. • PC SW for measurement pre and post processing: preparation of the test structure, result download, tree-view, table view and graphical view, storing and printing. APPLICATION Measurement of protective earthing of: • Mono and multi-leg pylons with protective earth cable connected • MV to LV transformer stations; • Ski lifts, radio towers; • Solar Power plants, wind and water turbine; • Industrial areas. STANDARDS Functionality • EN 61557 - 5 • IEEE 80 - 2000 • IEEE 81 - 2012 • IEEE 142 • IEEE 367 - 2012 Electromagnetic compatibility • EN 61326 Safety • EN 61010 - 1 • EN 61010 - 2 - 030 c • EN 61010 - 2 - 032 • EN 61010 - 031

Open the catalog to page 1
MI 3290 Earth Analyser EN - 2

« All model versions Include following accessory: • Instrument MI 3290 • Current earth spike 90 cm, 2 pcs • Potential earth spike 50 cm, 2 pcs • Connection lead black 2 m • Test lead 5 m blue • Test lead 5 m red • Test lead 50 m black on cable reel • Test lead 50 m green on cable reel • Test lead 50 m blue on cable reel • Shielded test lead 75 m on reel • G clamp • Set of test probes, crocodile clip and 2 m test lead, 4 pcs • Bag for accessories • USB cable • Mains cable • Calibration certificate • Instruction manual • PC SW Metrel ES Manager 13 MI 3290 GX1 • Licence GX • Iron clamp A 1018...

Open the catalog to page 2
MI 3290 Earth Analyser EN - 3

OPTIONAL ACCESSORY Photo Current clamp (low range, leakage), 3.5 m length High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 3.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well. Current clamp Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop. Flex clamp 5 m with 15 m shielded cable Flexible current clamp with circumference of 5 m and connection cable of 15m. Bag for accessories, with...

Open the catalog to page 3
MI 3290 Earth Analyser EN - 4

METREL D.D. Measuring and Regulation Equipment Manufacturer Ljubljanska 77 SI-1354 Horjul, Slovenia T +386 (0)1 75 58 200, F +386 (0)1 75 49 226 metrel@metrel.si, www.metrel.si Mp T |— | ® Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.

Open the catalog to page 4

All METREL catalogs and technical brochures