Catalogs >
METREL >
MI 3250 MicroOhm 10A EN

MI 3250 MicroOhm 10A EN
2Pages

Catalog excerpts

High Voltage Insulation / Continuity / Earth Continuity testers MI 3250 MicroOhm 10A The MI 3250 MicroOhm 10A is portable low resistance ohmmeter for measuring low resistances of breakers and switches, busbars, cable joints, small to medium sized transformer and motor windings for industrial application, etc., with test current up to 10 A. The used 4-lead Kelvin testing method together with automatic bidirectional procedure ensure very high accuracy of test results (0,25%). The instrument can be powered by mains or internal rechargeable batteries. Test results can be stored on the instrument and with PC software HVLink PRO that is supplied as a part of standard set enables transfer of measured results to PC where they can be analysed or printed. MEASURING FUNCTIONS • Bidirectional resistance measurement from 0,1 µΩ up to 2000 Ω with test current up to 10 A; • Temperature compensation (with optional temperature probe). KEY FEATURES • Accurate: 0.1 nΩ best resolution with 0.25% accuracy. • Bar graph: on screen resistance bar graph. • Battery powered: more than 1000 measurements with 10 A test current can be performed when powered by internal battery only. • Safe: High overvoltage category CAT IV / 300 V. • Four measuring modes: Automatic, single, continuous and inductive. • Automatic thermal EMF elimination: with automatic bidirectional measurement. • Temperature compensation: measured resistance can be adjusted according to ambient temperature, which can be entered manually or measured by external probe. • Custom limits: limits can be set for PASS/ FAIL evaluation of test results. • Portable: lightweight 3 kg design with carry handle and shoulder strap. • Memory: built-in memory enables storage of up to 1000 test results. • Downloadable: stored test results can be via RS232 or USB interface transferred to the PC with installed HVLink PRO software, which enables downloading, review, analyses and printing of the test results. APPLICATION Measurement the resistance of: • Bus bar joints; • Motor and transformer windings; • Cables; • Fuses; • Aircraft frame bonds; • Rail and pipe bonds; • Lightning conductor bonding. STANDARDS Electromagnetic compatibility • IEC

Open the catalog to page 1

TECHNICAL SPECIFICATION ORDERING INFORMATION Measuring range Resolution ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(1 % of reading + 0.1 % FS) ±(0.25 % of reading + 0.01 % FS) ±(1 % of reading + 0.25 % FS) ±(1 % of reading + 0.25 % FS) Power supply (mains voltage) Power supply (batteries) 6 x 1.2 V NiMH 3500 mAh batteries, type C Overvoltage category Protection class Double insulation Instrument MI 3250 MicroOhm 10A Large Kelvin test clip, 2 pcs Test cable with Kelvin...

Open the catalog to page 2

MI 3250 MicroOhm 10A EN 2Pages

Catalog excerpts

All METREL catalogs and technical brochures

MI 3250 MicroOhm 10A EN
2Pages