MI 3152H EurotestXC 2,5 kV is an instrument from the new generation of Metrel's multifunctional measuring instruments. The already well known functions like complete installation safety testing according to IEC/EN 61557 and AUTO SEQUENCE testing of TN and TT earthing systems expanded with insulation resistance measurement with the test voltage up to 2,5 kV are managed by a completely new user interface based on large colourtouch screen display. A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, varistor testing, earth resistance measurement with 3 wire and 2 clamps method and illuminance measurement, TRMS current measurement up to RCD tests, line and loop impedance tests as well as diagnostic test enabled by PI and IJAR indexes calculation. MEASURING FUNCTIONS • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation; • Varistor test; • Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • Line/Loop impedance combined also in one function Z AUTO; • Loop impedance with Trip Lock RCD function; • TRMS voltage and frequency measurements; • Phase sequence; • Power and THD measurement (up to the 12th harmonic); • RCD testing (general and selective, type AC, A, F, MI RCD, EV RCD, PRCD, PRCD-K, PRCD-S); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • Illumination (option); • High resolution Loop impendance (ml) (option); • EVSE AUTO SEQUENCEs and function inspections; • Determining location of cables (option); • QR and/or barcode scanner support (option). • Predefined profile dependent AUTO SEQUENCEs. • Predefined Automatic tests: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe). • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • Monitoring of all 3 voltages in real-time. • Automatic polarity reversal on continuity test. • Automated RCD testing procedure. • Automated Impedance testing procedure (Z AUTO). • Functional inspections. • Measurement filtering according to the selected area group. • Built-in charger and rechargeable batteries as standard accessory. • BT communication with PC, Android tablets and smart phones via built-in BT. • PC SW Metrel ES Manager (structure and report creation, data upload/download). • Optional aMESM Android APP (structure and report creation, data upload/download). • Testing of TT and TN supply systems; • Testing of single and multiphase systems; • Initial and periodic testing of domestic and industrial installations; • Lightning installations; • Observation of insulation trends; • Electrical Vehicle Supply Equipment (EVSE) testing. STANDARDS Functionality • EN 61557; DIN 5032 Other reference standards for testing: • IEC/EN/HD 60364-4-41; IEC/EN 61008; IEC/EN 61009; BS 7671; AS/NZ 3017 Electromagnetic compatibility (EMC): • IEC/EN 61326-1 Safety • IEC/EN 61010-1; IEC/EN 61010-031; IEC/EN 61010-2-030; IEC/EN 610102-032

TECHNICAL SPECIFICATION Function CONTINUITY INSULATION RESISTANCE Test Current 7 mA 2-wire Test Current 200 mA 2-wire Test Voltage 50/100/250 V Test Voltage 500/1000 V Test Voltage 2500 V VOLTAGE CURRENT ORDERING INFORMATION Measuring range 0.00 Ω ... 19.99 Ω 20.0 Ω ... 1999 Ω 0.00 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200.0 Ω ... 1999 Ω 0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ 0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 199.9 MΩ 200 MΩ ... 999 MΩ 0.00 MΩ... 19.99 MΩ 20.0 MΩ... 199.9 MΩ 200 MΩ... 999 MΩ 1.00 GΩ... 19.99 GΩ Accuracy ±(5 % of r. + 3 digits) ±(3 % of r. + 3 digits) ±(5 % of...