Catalogs >
METREL >
MI 3132 EV Tester EN

MI 3132 EV Tester EN
3Pages

Catalog excerpts

Electrical Installation Safety NEW MI 3132 EV tester is a portable, battery powered test instrument with excellent IP protection and designed especially for electric vehicle testing. The instrument support the latest standard UN ECE R100 Annex 4A, 4B, intended for measurement of insulation resistance for electric vehicle. The instrument is ergonomic in design with intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. Besides those, the instrument supports a wide range of tests and measuring functions, including 2 A Micro Ohm measurement, on-line voltage monitoring, insulation test up to 1500 V as well as functional and visual inspections. MEASURING FUNCTIONS • Insulation measurements according to UN ECE R100 and ISO 6469-3 with own REESS as DC voltage source; • Insulation resistance with DC voltage from 50 V to 1500 V; • DC voltage measurement; • TRMS voltage and frequency measurements; • Four wire Micro Ohm measurements with 2 A DC test current; • Low Ohm measurements with 7 mA and 200 mA DC test current; • Visual safety and functional inspections. KEY FEATURES • Insulation resistance measuring according to UN ECE R100 measuring using internal DC source; • Performing accurate four wire measurements with Kelvin clamps and up to 2 A measuring current; • Settable duration and current direction (unidirectional or bidirectional) in the Micro Ohm measurement;; • Insulation range: wide range of insulation test voltages from 50 V to 1500 V, resistance measuring range up to 3 GO; • Overvoltage category 1000 V CAT III; • 4.3'' colour LCD display with touch screen; • Programmable AUTO SEQUENCEs; • High degree of protection for outdoor use and rough environment; • DC resistance measurements; • Support for single or automated measurements; • Built-in charger and rechargeable Li-Ion batteries as standard accessory; • BT communication with PC, via built-in BT module; • PC SW Metrel ES Manager for measurement pre and post processing: preparation of the test structure, result download, tree-view, table view and graphical view, storing and printing. APPLICATION • Electric vehicle high voltage cables insulation and resistance test; • Battery insulation check; • EV chassis and components bonding test; • EV safety tests; • Mode 3 charging cables insulation and resistance test • Electric vehicle after crash safety check; • Electrical troubleshooting; • For electric vehicle services, workshops and production facilities; • Test at Periodic Technical Inspections STANDARDS Functionality • UN ECE R100 • ISO 6469-3 Electromagnetic compatibility • EN 61326

Open the catalog to page 1

TECHNICAL SPECIFICATION Function µΩ - Meter Measuring range Freq. range: 15 Hz … 99 Hz, ±(0.5 % of reading + 3 digits) Freq. range: 100 Hz … 399 Hz, ±(1 % of reading + 3 digits) Freq. range: 400 Hz … 1200 Hz, ±(10 % of reading + 3 digits) 1.000 kHz … 1.200 kHz Riso (lower result) 5.0 ... 19.9 kΩ/V 20.0 ... 49.9 kΩ/V Riso (higher result) Freq. range: DC, 15 Hz … 99 Hz, ±(0.5 % of reading + 3 digits) Freq. range: 100 Hz … 399 Hz,

Open the catalog to page 2

ORDERING INFORMATION Photo Order No. Acc. decription A 15S9 Power supply adapter 12 V / 3 A Photo Order No. Acc. decription A 1064 Crocodile clip, red A 1297 Crocodile clip, brown A 1309 Crocodile clip, green A 1547 Crocodile clip, grey A 1014 Test probe, black A 1593 Large Kelvin test crocodile A 1298 Test probe, brown A 1437 Test lead with Kelvin probe A 1062 Test probe, green Standard set MI 3132 ST • Instrument MI 3132 EV Tester • A 1551 Carrying bag (L) • A 1707 Set of carrying straps • A 178 2 4-wire test lead, 2 x 2 m, 2 x 5 m • A 1781 3-wire test lead, 3 x 1.5 m • A 1780 2-wire test...

Open the catalog to page 3

MI 3132 EV Tester EN 3Pages

Catalog excerpts

All METREL catalogs and technical brochures

MI 3132 EV Tester EN
3Pages