Electrical Installation Safety Photovoltaic and electrical installations tester MI 3108 EurotestPV MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values as required by EN 61829 and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time. MEASURING FUNCTIONS Photovoltaic installations: • Measurements on DC side of PV installation: • Voltage, current, power; • Uoc (Open Circuit Voltage) and Isc (Short Circuit Current); • I - U curve of PV modules and strings; • Irradiance; • Module temperature. • Measurements on AC side of PV installation: • Voltage, current, power; • Efficiency of PV module, inverter, PV system calculation. Electrical installations: • Insulation resistance; • Continuity of PE conductors; • Line impedance; • Loop impedance (sub-functions with high current and without RCD tripping); • RCD testing (type AC, A and B); • Earth resistance; • AC current (load and leakage); • TRMS voltage, frequency, phase sequence; • Power, energy, harmonics. KEY FEATURES Photovoltaic installations: • Calculation of STC values: the measured current and voltage values are, according to environment conditions, recalculated to Standard Test Condition values which makes possible, to compare the results even if they were taken under different test conditions. • Graphical representation: the I-V characteristic of PV module or string is graphically represented on LCD display. • Power and efficiency measurements: 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements. • PV Remote Unit: Optional unit for simultaneous measurements of solar irradiation and temperature of PV module. Electrical installations • RCD Auto: Automated RCD testing procedure significantly reduces test time. • Trip Lock function: Loop impedance test are performed without tripping the RCD. • B type RCD testing: is supported. • Earth resistance measurement: instrument supports 3-wire earth resistance testing. • Built-in fuse tables: for automatic evaluation of the line / loop impedance results. • Online voltage monitoring: monitors all 3 voltages in real time. • Scope function: real-time U/I scope. • Harmonics analysis: 1-phase power and energy measurements with up to 11th harmonics analysis is supported. • Memory: Up to 1800 test results or up to 500 graphical results with timestamp can be stored in internal memory. • BT connectivity: it enables BT communication with Android tablets and smart phones via optional BT dongle. • Android application: enables advanced data management APP EuroLink PV and EuroLink Android. • PC SW EuroLink PRO enables downloading, uploading, review, analyses and printing of test results. APPLICATION • Testing, evaluations and troubleshooting of photovoltaic installations. • Power and energy efficiency measurements (AC and DC). • Initial and periodic testing of domestic and industrial single and three-phase electrical installations. STANDARDS Functionality • IEC/EN 61557 series; • IEC 62446 (photovoltaics); • IEC 61829. Other reference standards for testing • BS 7671; • EN 61008; • EN 61009; • EN 60364-4-41; • AS/NZ 3017 Electromagnetic compatibilit

TECHNICAL DATA ORDERING INFORMATION PHOTOVOLTAIC INSTALLATION MEASUREMENTS Function Voltage Measuring range 0 VDC ... 999 VDC 0 VAC ... 999 VAC I-V m.: 0 VDC ... 999 VDC Panel m.: 0.0 mA ... 300 ADC Invert. m.: 0.0 mA ... 300 AAC I-V m.: 0.00 A ... 15 ADC Panel m.: 0 ... 999 kW I-V m.: 0 ... 14.99 kW 1000 V / 15 A / 15 kW 000 ... 1.75 kW/m2 -10.0 °C ... + 85.0 °C Current Power U / I curve Irradiation Temperature Basic accuracy ±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits) ±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading +...