Catalogs >
METREL >
MI 2893 Power Master XT EN

MI 2893 Power Master XT EN
4Pages

Catalog excerpts

Class A Power Quality Analyser NEW Class A Power Quality Analyser MI 2893 Power Master XT The MI 2893 Power Master XT is a hand-held three phase power quality analyzer with a large easyto-read graphical color display enabling the user to detect harmonics, phasors, waveforms and transients with sampling frequency 1 MSamples/sec in the installation simply by connecting the device. The instrument is designed for a long term recording as well as for troubleshooting power quality problems in threephase and single-phase power distribution systems. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview for troubleshooting. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct and remote reading from the micro SD memory card, analysis of long term records and automatic creation of professional test report. MEASURING FUNCTIONS • Voltage: TRMS, peak, crest factor (4-channel); • Current: TRMS, peak, crest factor (4-channel); • Power (active, reactive, apparent); • Power measurements fully compliant with IEEE 1459 (active, non active, fundamental, harmonic, load un-balance) and classic (vector or arithmetic) method; • VFD (variable frequency drive, 5 Hz – 120 Hz), 400 Hz; • Unbalance, flicker measurement; • Harmonic and interharmonic analysis up to 50th harmonics, THD and TDD measurements; • Energy (active, apparent, reactive, generated, consumed); • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); • Inrush currents monitoring and recording; • Waveform/inrush displaying, snapshot and recording; • Transients with sampling frequency 1 MSamples/sec; • Power quality analysis according to EN 50160, IEEE 519; • Recording up to 7 adjustable alarms; • Temperature measurement; • Power factor, cos fi and tg fi. • 4-voltage channels with wide measurement range; • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Current clamp auto range selection; • Sampling frequency on transients recording > 1 MSamples/sec; • Compliance with power quality standard IEC 61000-4-30 Class A; • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB; • Color-coded input terminals and termi al n labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the Euro set; • Remote communication via Ethernet (GPS clock synchronization - optional). • High speed transient capturing; • Energy consumption optimization; • Power quality assessment and trou leshooting in low and middle b voltage electrical systems; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads. STANDARDS Safety • EN 61010-1 Measurements: • IEC/EN 61000-4-30,Class A; • IEC/EN 61557-12; • IEC/EN 61000-4-7, Class I; • IEC/EN 61000-4-

Open the catalog to page 1

TECHNICAL SPECIFICATION FUNCTION Voltage inputs Number of inputs Nominal voltage range Three phase connection Single phase connection Measuring range Three phase connection Single phase connection Max. transient peak voltage Accuracy Sampling rate Mains frequency range Current inputs Number of inputs Measuring range: Range 1: Range 2: Current clamp accuracy: A 1588 A 1281 A 1069 A 1501 / A 1502 / A 1227 / A 1445 A 1503 / A 1446 Functions Power (P, Q, S, cos φ, PF…) Energy Harmonics (DC ... 50th) @50/60 Hz Harmonics (DC ... 13th) @400 Hz Harmonics (DC ... 20th) @VFD (5 - 16 Hz) Harmonics (DC...

Open the catalog to page 2

OPTIONAL ACCESSORIES – AC FLEX CURRENT CLAMPS Part No. Waterproof case for outdoor application and recordings (pylons, switchyards) Waterproof case with a telescopic handle and smooth-running wheels Safety fuse adapter, 3 pcs Safety flat clamp, 4 pcs Magnetic contact probe Temperature probe Current clamp A 1281 extension cable, 5 m Nominal range Measurement range Accuracy Ø Sensor length Overvoltage category IP Wide range power supply SanDisk microSD card reader OPTIONAL ACCESSORIES – AC IRON CURRENT CLAMPS Part No. Nominal range Measurement range Accuracy Jaw opening Max. conductor...

Open the catalog to page 3

ORDERING INFORMATION PC Software PowerView 3 software is a powerful platform for downloading, analysing recorded data and creation of power quality test reports. PC Software contains a package of functionalities needed for profound evaluation of power quality phenomena, data comparison and creation of complex test reports. It works in conjunction with Metrel new generation power quality analysers. For the instruments equipped with GPRS functionality PowerView3 enables remote control and data download. KEY FEATURES • User friendly interface: wide range of quick buttons, possibility to...

Open the catalog to page 4

MI 2893 Power Master XT EN 4Pages

Catalog excerpts

All METREL catalogs and technical brochures

MI 2893 Power Master XT EN
4Pages