Catalogs >
METREL >
MI 2884 Energy Master XA EN

MI 2884 Energy Master XA EN
4Pages

Catalog excerpts

Power Quality Analyser Power Quality Analyser MI 2884 Energy Master XA The MI 2884 Energy Master XA is a hand-held three phase power quality analyser, specially designed for energy logging detection of harmonics, phasors and waveforms anomalies in the installation simply by connecting the device. Reducing energy use reduces energy costs and may result in a financial cost saving. Energy Master XA serves as a perfect tool for long term recording and later post processing of recorded data. Large easy-to-read graphical colour display enabling the user on site analysis and data checks. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long-term records and automatic creation of professional test report. MEASURING FUNCTIONS • oltage: TRMS, peak, crest factor (3-channel); V • urrent: TRMS, peak, crest factor (4-channel); C • ower (active, reactive, apparent); P • ower measurements fully compliant with P IEEE 1459 (active, non active, fundamental, harmonic, load unbalance) and classic (vector or arithmetic) method; • nbalance, flicker measurement; U • Harmonic and interharmonic analysis up to 50th harmonics, THD and TDD measurements; • nergy (active, reactive, generated, consumed); E • apturing and recording of power supply C events (shutdowns, interruptions, swells, dips); • nrush currents monitoring and recording; I • aveform/inrush displaying, snapshot and W recording; • Transients recording; • ower quality analysis according to EN 50160, P IEEE 519; • ecording up to 7 adjustable alarms; R • Temperature measurement; • Power factor, cos fi and tg fi. • 3-voltage channels with wide measurement range: 0 ... 1000 Vrms (CAT III / 1000 V); • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Sampling frequency on transients recording 30.6 kSamples/sec; • Compliance with power quality standard IEC 61000-4-30 Class S; • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB; • Color-coded input terminals and terminal labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Current clamp auto range selection; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the Euro and Advanced set. • Energy consumption optimization; • Power quality assessment and troubleshooting in low and middle voltage electrical systems; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads. STANDARDS Safety: • EN 61010-1 Measurements: • IEC/EN 61000-4-30,Class S; • IEC/EN 61557-12; • IEC/EN 61000-4-7, Class I; • IEC/EN 61000-

Open the catalog to page 1

TECHNICAL SPECIFICATION FUNCTION Voltage inputs Number of inputs Nominal voltage range (L – N) Measuring range Accuracy Sampling rate Mains frequency range AC+DC 4 Phase (L-N): 50 ... 1000 VRMS Line (L-L): 50 ... 1730 VRMS 10% ... 150% of nominal voltage IEC 61000-4-30 Class S, ±0.2% of nominal voltage, 7 kSamples per sec @ 50/60 Hz, sync with mains freq. 42,5 ... 69,0 Hz ±10 mHz Current inputs Number of inputs Measuring range: Range 1: Range 2: Current clamp accuracy: A 1588 A 1281 A 1069 A 1501 / A 1502 / A 1227 / A 1445 A 1503 / A 1446 Measuring range Depends on voltage and selected...

Open the catalog to page 2

OPTIONAL ACCESSORIES – AC FLEX CURRENT CLAMPS Part No. Professional waterproof case Safety fuse adapter, 3 pcs Safety flat clamp, 4 pcs Magnetic contact probe Temperature probe Current clamp A 1281 extension cable, 5 m Waterproof case with a telescopic handle and smooth-running wheels Waterproof case for outdoor application and recordings (pylons, switchyards) Nominal range Measurement range Accuracy Ø Sensor length Overvoltage category IP Wide range power supply SanDisk microSD card reader OPTIONAL ACCESSORIES – AC IRON CURRENT CLAMPS Part No. Nominal range Measurement range Accuracy Jaw...

Open the catalog to page 3

ORDERING INFORMATION PC Software PowerView 3 software is a powerful platform for downloading, analysing recorded data and creation of power quality test reports. PC Software contains a package of functionalities needed for profound evaluation of power quality phenomena, data comparison and creation of complex test reports. It works in conjunction with Metrel new generation power quality analysers. For the instruments equipped with GPRS functionality PowerView3 enables remote control and data download. MI 2884 Advanced set (AD) • Instrument Energy Master XA • A 1502 1-phase flexible current...

Open the catalog to page 4

MI 2884 Energy Master XA EN 4Pages

Catalog excerpts

All METREL catalogs and technical brochures

MI 2884 Energy Master XA EN
4Pages