Electrical Installation Safety Other instruments / adapters / accessories MI 2093 Line Tracer The MI 2093 Line Tracer is a universal instrument intended for tracing hidden conductive paths under plasters in walls, floors and ground or for determining one wire in a tuft of wires. Fuses or outlets belonging to a certain loop can be located as well. Line Tracer helps the operator to resolve hidden line problems easily (short circuits, interruptions, breakages). MEASURING FUNCTIONS • Tracing cables in walls, ceilings, floor and ground; • Tracing live or voltage free cables; • Locating cable interruptions and shortcircuits in cables; • Locating concealed sockets and distribution boxes; • Locating fuses and assignment to circuits; • Determining an individual wire in a bundle of wires; • Tracing pipe installations and other conductive loops. • Detection depth up to 2 m can be achieved. • Works on both, energized and non-energized systems. • The highly sensitive Receiver R10K detects injected signal around the measured line or object. • Three levels of sensitivity adjustment: low, middle and high. Each level can be additionally precisely adjusted. • Dual, bar-graph and buzzer indicator ensures indication in dark and noisy environment. • Electrical installations testing; • Cable networks testing; • Pipe installations testing; • Telecommunication systems testing. STANDARDS Electromagnetic compatibility • IEC/EN 61326 Safety •

TECHNICAL DATA Transmitter T10K Power supply 4 x 1.5 V alkaline or 4 x 1.2 V rechargeable batteries, type AA Overvoltage category Receiver R10K Power supply METREL D.D. Measuring and Regulation Equipment Manufacturer Ljubljanska 77, SI-1354 Horjul, Slovenia T +386 (0)1 75 58 200, F +386 (0)1 75 49 226 [email protected], www.metrel.si Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice. MI 2093 • Transmitter T10K • Receiver R10K • Test lead for R10K with built-in resistor and test probe, 1.5 m • Test lead...