1. Catalogs
  2. METREL
  3. MD 116 Non Contact Voltage Detector EN

MD 116 Non Contact Voltage Detector EN

MD 116 Non Contact Voltage Detector EN

Product catalog summary
Overview: The MD 116 is a non-contact voltage detector designed for ease of use by both home handymen and professional electricians. It features optical, acoustical, and vibrating indicators, and includes a pocket clip for convenience.
Specifications:
  • Voltage Detection: Non-contact from 12 V AC.
  • Measurement Range: 12 V to 1000 V AC.
  • Frequency Range: 40 to 400 Hz.
  • Temperature Range: 0 to 40°C, with less than 80% relative humidity.
  • Current Consumption: 80 mA.
  • Power Supply: 2 x 1.5 V LR03 batteries (type AAA).
  • Overvoltage Category: CAT IV / 1000 V.
  • Degree of Protection: IP 65.
  • Dimensions: 155 x 25 x 23 mm.
  • Weight: Approximately 58 g.
Key Features:
  • High-performance LED flashlight for dark conditions.
  • Automatic self-test upon power-up.
  • Switchable sensitivity between low (12 V) and high (90 V) AC.
  • Capacitive measuring process, eliminating the need for current flow.
Applications: Suitable for general-purpose use, low-level electrical testing, and hobby work.
Compliance and Standards:
  • Directives: 2012/19/EU WEEE, 2014/30/EU EMV, 2014/35/EU LVD.
  • Standards: IEC60529, IEC/EN61010, IEC/EN61140, IEC/EN61326-1.
Package Includes: The MD 116 device, two AAA batteries, an instruction manual, and a warranty.
Manufacturer: Metrel D.D., located in Slovenia, specializes in measuring and regulation equipment.
See more

Catalog excerpts

MD 116 Non Contact Voltage Detector EN-1

Mobile, easy to use and ideal tool for every electrician MD 116 Non-contact voltage detector Contact voltage tester The MD 116 is a non-contact voltage tester that features an optical, acoustical and a vibrating indicator. It comes complete with a pocket clip. It is easy to operate and is an essential tool for both home handymen and professionals. The MD 116 can detect livevoltage wires in splices, cable plugs, cable drums, sockets, switches and junction boxes. The operation of the MD 116 is self-tested automatically after power up. No extra button required. It supports switching between low and high sensitivity (12 / 90 V AC) and has an integrated LED flashlight for working in dark conditions. The Metrel MD 116 uses a capacitive measuring process. In contrast to inductive measurements, no flow of current is required. MEASURING FUNCTIONS • Non-contact voltage detection from 12 V AC. • High performance LED flashlight. • Optical, acoustical and vibrating indication in case of power. • 12 V … 1000 V AC measurement range. • Optical, acoustical and vibrating indication. • CAT IV / 1000 V overvoltage protection. • General purpose. • Low level electrical testing. • Hobby work. TECHNICAL DATA Function Display Measurement range Frequency range Temperature range Current consumption Duty cycle Power supply Overvoltage category Degree of protection Dimensions Weight Range Optical, acoustical, vibrating 12 … 1000 V AC 40 … 400 Hz 0 … 40°C, < 80% relative humidity 80 mA Continuous 2 x 1,5 V LR03 batteries (type AAA) CAT IV / 1000 V IP 65 155 x 25 x 23 mm Approx. 58 g METREL D.D. Measuring and Regulation Equipment Manufacturer Ljubljanska 77, SI-1354 Horjul, Slovenia T +386 (0)1 75 58 200, F +386 (0)1 75 49 226 [email protected], www.metrel.si Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice. STANDARDS • IEC60529 • IEC/EN61010 • IEC/EN61140 • IEC/EN61326-1 STANDARD SET MD 116 • Non-contact voltage detector MD 116 • 1,5 V battery test, type AA

 Open the catalog to page 1

All METREL catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.