Mobile, easy to use and ideal tool for every electrician MD 106 Non-contact voltage detector Contact voltage tester The MD 106 is a basic noncontact voltage tester that features an optical and acoustical indicator. It comes complete with a pocket clip. It is easy to operate and is an essential tool for both home handymen and professionals. The MD 106 can detect livevoltage wires in splices, cable plugs, cable drums, sockets, switches and junction boxes. The operation of the MD 106 can be verified with the self-test button. The Metrel MD 106 uses a capacitive measuring process. In contrast to inductive measurements, no flow of current is required. MEASURING FUNCTIONS • Non-contact voltage detection from 90 V AC. • Optical and acoustical indication in case of power. • 90 V … 1000 V AC measurement range. • Optical and acoustical indication. • CAT IV / 1000 V overvoltage protection. • General purpose. • Low level electrical testing. • Hobby work. TECHNICAL DATA Function Display Measurement range Frequency range Temperature range Current consumption Duty cycle Power supply Overvoltage category Degree of protection Dimensions Weight DIRECTIVES Range Optical, acoustical 90 … 1000 V AC 50 … 60 Hz -10°C ...+50°C, < 75% relative humidity 80 mA Continuous 2 x 1,5 V LR03 batteries (type AAA) CAT IV / 1000 V IP 65 155 x 25 x 23 mm Approx. 56 g METREL D.D. Measuring and Regulation Equipment Manufacturer Ljubljanska 77, SI-1354 Horjul, Slovenia T +386 (0)1 75 58 200, F +386 (0)1 75 49 226 [email protected], www.metrel.si Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice. STANDARDS • IEC60529 • IEC/EN61010 • IEC/EN61140 • IEC/EN61326-1 STANDARD SET MD 106 • Non-contact voltage detector MD 106 • 1,5 V battery test, type AAA,