Electrical Equipment / Machine / Switchboard safety A 1832 Mode 3 Charging Cable Adapter Electrical Equipment / Machine / Switchboard safety The A 1832 Mode 3 Charging cable adapter is used for electrical safety testing of Mode 3 EV charging cables with Type 2 connectors together with supported METREL or thirdparty testers. If used together with Metrel AUTOSEQUENCES®, integrated in the newer multifunctional testers, the EV charging cable can be comprehensively tested (including functionally) with a push of a button. It is possible to create a professional report using MESM software. • Type 2 connectors enable connection of Mode 3 EV charging cable • Banana sockets outputs for connecting test instrument test leads • LED indicators for indication of continuity of phase conductors (L1, L2, L3, N) • Test input for connecting test instruments with AutoSequences® • Support for EV CABLES AUTO SEQUENCE®s* • MESM report creation** APPLICATION • Continuity testing of all wires: • L1 > L1 • L2 > L2 • L3 > L3 •N>N • PE > PE • CP > CP • Resistance of PP resistor (input) • Resistance of PP resistor (output) • Fast continuity check of L1, L2, L3, N conductors with LEDs (by using the sub leakage test) • Insulation resistance of phase conductors to earth * AUTO SEQUENCE®s are supported only on the MI 3365 OmegaEE XD instrument series. ** Report printing is only available via the MESM PC SW. The MESM lic

AUTO SEQUENCE EXAMPLE ORDERING INFORMATION Standard set A 1832 • Adapter A 1832 Mode 3 Charging Cable Adapter • A 1053 Power cable L=1,5m BK 0,75mm2 Metrel connector/Schuko EU male • Instruction manual GENERAL DATA CAN BE USED TOGETHER WITH Charging cable connector Maximum test current 10 A on test connector / 25 A on banana sockets Measuring category Protection classification Double insulation Pollution degree Protection degree Operation conditions Working temperature range Maximum relative humidity Storage conditions Temperature range Maximum relative humidity METREL d.o.o. Test and Measurement...