Electrical Installation Safety Other instruments / adapters / accessories A 1631 EV monitoring cable The A 1631 EV monitoring cable is a special accessory designed for CP signal, current and voltage monitoring during Electric Vehicle (EV) charging process in conjunction with supported Metrel testers and adapters. It is equipped with a Type 2 female plug connector to connect to an EV and a Type 2 male socket outlet for connecting to Electrical Vehicle Supply Equipment (EVSE). • Monitoring during a.c. EV charging with up to 32 A EVSE: • CP signal communication monitoring during charging;* • PP resistance; • Current; • Voltage; • Possible to connect instruments for current and voltage verification (i.e. MI 2883 Energy Master, MI 2884 Energy Master XA); • Possible to simulate external load (up to 13 A) via banana plugs and verify EVSE counters. • Monitoring of the EV charging process. STANDARDS Functionality:* • EN 61851-1; • HD 60364-6; • EN 60364-7-722 Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1; • EN 61010-2-030; • EN 61010-031 * Requires: A 1632 eMobility Analyser and MI 3152 EurotestXC or MI 3155

ORDERING INFORMATION TECHNICAL SPECIFICATION Measurement functions Max. charging current of a.c. EVSE with Type2 connectors Max. external load during EV simulation via banana plugs General Mains power supply Protection category Measuring category IP 65 (case closed) IP 40 (case open) Working temperature range Maximum relative humidity Working nominal altitude Standard set A 1631 • A 1631 EV monitoring cable • Test lead, 1,5 m, 5 pcs (black - 3 pcs, green - 1 piece, blue - 1 piece) • Test cable with 2 mm banana plug, red, 1 m, 2 pcs * The eMobility App can be downloaded free of charge from Android...