Other instruments / adapters / accessories Other instruments / adapters / accessories A 1532 XA EVSE adapter The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. XA version supports 3 phase load testing up to 13 A and different error types, including PE open. If used together with Metrel AUTOSEQUENCES®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional stationbased report with MESM. • Banana socket outputs for connection to a 3-phase installation tester; • Voltage indicators on EVSE output; • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection; • Control Pilot resistance selector for simulation of electric vehicle status; • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE); • Type 2 Male Plug connector for connection to EVSE; • 6 mA EV RCD support; • Functional tests support;* • EVSE AUTO SEQUENCE® support;* • MESM report creation;** • Load testing up to 13 A on socket - 1 phase or on banana sockets - 3 phase; • Fault simulation of Diode short, PE-CP short and PE open; • Output BNC connector for CP signal monitoring. • On-site testing of EVSE charging station installation; • Initial and periodic testing of private, semi-private and public EVSE charging stations. * Functional tests and AUTO SEQUENCE® are supported only on the MI 3155 Eurotest XD, MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers. ** Report printing is only available via the MESM PC SW. The MESM license (P 1101) is to be pu

TECHNICAL SPECIFICATION ORDERING INFORMATION Input voltage Test current Maximum load current Proximity Pilot (PP) simulation Control Pilot (CP) simulation State A (not connected) State B (connected, not charging) State C (charging without ventilation) State D (charging with ventilation) Error states CP short to PE via diode Diode short PE open Overvoltage category Protection degree Pollution degree Protection classification Double insulation Test lead length Working temperature range Storage temperature range Maximum storage relative humidity Standard set A 1532 XA • Instrument XA EVSE adapter...