*mydirectindustry

Catalogs
METREL
A 1532 EVSE adapter EN

A 1532 EVSE adapter EN

Product catalog summary

Standards and Safety:
The document outlines compliance with safety standard EN 61010-1 and functionality standard EN 61851-1 for the A 1532 EVSE adapter, which is used for testing Electric Vehicle Supply Equipment (EVSE).

Product Description:
The A 1532 EVSE adapter is designed for testing Mode 3 EV supply equipment with a type 2 connector. It works with METREL installation testers to verify electrical safety and functionality. When used with Metrel AUTOSEQUENCES®, it allows for comprehensive testing of EVSE charging stations.

Key Features:

Banana socket outputs for 3-phase installation tester connection.
Voltage indicators on EVSE output.
Proximity and Control Pilot resistance selectors for simulating EV cable presence and vehicle status.
Type 2 Male Plug connector for EVSE connection.
Output BNC connector for CP signal monitoring.
Supports 6 mA EV RCD and functional tests.
MESM report creation capability.

Applications:
The adapter is suitable for on-site testing of EVSE charging station installations, including initial and periodic testing of private, semi-private, and public stations.

Technical Specifications:

Input voltage: 400 V (3-phase).
Frequency: 50 Hz.
Test current: 267 A (10ms) intermittent operation.
Overvoltage category: 300 V CAT II.
Protection degree: IP 40.
Dimensions: 250 x 100 x 70 mm.
Weight: 0.90 kg.
Working temperature range: 0 °C to 40 °C.

Supported Instruments:
The document lists various METREL testers compatible with the A 1532 adapter, including MI 3155 EurotestXD, MI 3152 EurotestXC, and others, with varying levels of support for features like EV RCD testing and report generation.

Ordering Information:
The standard set includes the EVSE adapter, a carrying bag, and an instruction manual. Note that photographs may differ from the actual product, and technical specifications are subject to change without notice.

Catalog excerpts

Other instruments / adapters / accessories Other instruments / adapters / accessories A 1532 EVSE adapter The A 1532 EVSE adapter is a special accessory intended for testing Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers. It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. If used together with Metrel AUTOSEQUENCES®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional stationbased report with MESM. • Banana socket outputs for connection to a 3-phase installation tester; • Voltage indicators on EVSE output; • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection; • Control Pilot resistance selector for simulation of electric vehicle status; • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE); • Type 2 Male Plug connector for connection to EVSE; • Output BNC connector for CP signal monitoring; • 6 mA EV RCD support; • Functional tests support;* • EVSE AUTO SEQUENCE® support;* • MESM report creation;** • Basic support: • A 1532; • Partial support: • 6 mA EV RCD; • EVSE report;** • Full support: • Functional test support; • EVSE AUTO SEQUENCE® support. • On-site testing of EVSE charging station installation; • Initial and periodic testing of private, semi-private and public EVSE charging stations. * Functional tests and AUTO SEQUENCE® are supported only on the MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers. ** Report printing is only available via the MESM PC SW. The MESM

Open the catalog to page 1

TECHNICAL SPECIFICATION ORDERING INFORMATION Input voltage Test current Proximity Pilot (PP) simulation Control Pilot (CP) simulation State A (not connected) State B (connected, not charging) State C (charging without ventilation) State D (charging with ventilation) State E (error - CP short to PE via diode) Overvoltage category Protection degree Pollution degree Protection classification Double insulation Test lead length Working temperature range Storage temperature range Maximum storage relative humidity Standard set A 1532 • Instrument EVSE adapter • Small soft carrying bag • Instruction...

Open the catalog to page 2

All METREL catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list