Technology behind Specimen SAMPLE PREPARATION SPECTRAL 250/350

SPECTRAL 250/350 Sample preparation of metals and materials have become more and more important because of the rapid development and improvement of both software as well as OES and XRF-devices during the past few years that shifts the detection limit for trace analyses. It is crucial to have the sample properly prepared. The sample needs to be both representative, homogeneous and with an even surface in order to eliminate factors that can influence the results. SPECTRAL 250 SPECTRAL 250 is a table-top portable surface grinder for the preparation of steel samples for spectroscopy. Its compact design...

SPECTRAL 350 SPECTRAL 350 is used to achieve excellent precision flat surfaces of iron and steel samples for spectroscopic analysis. The robust and vibration-free construction has been designed for continuous operation at high sample throughput. SPECTRAL 350 Series of instruments are available as Single Disc and Dual Disc Units with 350 mm wheel size which is dynamically balanced for smooth running. Due to its special design, grinding paper is sucked to the grinding disc which does not require any glue. SPECTRAL 350 Series are equipped with a strong aspiration device in addition to its special...

Sample Preparation for Spectroscopy Optical emission spectrometry (OES) and X-Ray fluorescence are most commonly used techniques for the analysis of metals and solid samples. Vacuum Suction of Grinding Paper Sample preparation of metals and materials have become more and more important because of the rapid development and improvement of both software as well as OES and XRF-devices during the past few years that shifts the detection limit for trace analyses. It is crucial to have the sample properly prepared. The sample needs to be both representative, homogeneous and with an even surface in order...

Table-top Surface Grinder for spectroscopic sample preparation of steels and irons, vibration-free construction,robust steel housing, strong 1,1 kW motor, working disc of 250 mm dia., with rotation speed of 2800 rpm, a rapid stop of the turning disc, suction created by special design retaining the abrasive paper on the disk(no need to glue or fix), disc covered halfway by lid allowing grinding only on a segment, spark trap, dust box and standard outlet for exhauster, easy to clean and ready for operation. 230 V, 1-phase, 50 Hz. Single Disc Surface Grinder for spectroscopic sample preparation...

Demirtas Dumlupinar Organize Sanayi Bolgesi Tel Ali Osman Sonmez Cd. No: 14 Bursa-TURKEY Fax 9 QUARTER CENTURY OF EXPERIENCE