Machine for dispensing medium-large shot sizes typically 30 to 200 ml of high-viscosity material directly from 200 lt drums The PasteShot 200 metering and mixing system is the preferred solution for dispensing medium to large shots for bonding, sealing and cartridge filling applications. It is suited for shot sizes typically 30 to 200 ml of high-viscosity materials which can be fed directly from 200 lt drums. The machine can be utilized for direct dispensing onto components, or into cartridges for manual applications. Proven piston pump technology ensures accurate and consistent processing of materials with high mix ratios or vastly differing viscosities: Ratio range capability 1:1 to 20:1 (depending upon pumps selected) Viscosity acceptance Up to 1,500,000 mPas Shot size Available from approx. 11 ml up to 194 ml at 10:1 volumetric ratio Cycle rate Up to 15 shots per minute (depending upon viscosity) Mixing Disposable Static or Rotary/Static Major component drum/pail size Approx. 200 lt (55 gal) Minor component reservoir size 30 lt (7,9 gal) stainless steel Minor component drum/pail size 20 lt (5 gal)

TYPICAL APPLICATIONS YOUR BENEFITS • Component bonding and sealing • Precise metered shot sizes achievable • Cartridge/Syringe filling • Reliable and robust operation • Suitable for processing abrasive media (when fitted with hardened parts) STANDARD FEATURES • Mixer Valve: Pneumatically operated TSV601 • Shot size adjuster with digital reference indicator • “Metered” or “Operator Controlled” shot size selection reservoir, pumps and hoses • Electronic low-level sensing to both materials with visual and audible alarms • Integrated PLC control with HMI operator interface • Stainless steel wetted...