Machine for dispensing small-medium shot sizes typically between 5 to 120 ml of high-viscosity material directly from 20 lt drums The PasteShot 20 metering and mixing machine was developed primarily for dispensing small to medium shots in bonding, sealing and cartridge filling applications. It is suited for shot sizes typically 5 ml to 135 ml (depending upon ratio) of high-viscosity materials which can be fed directly from 20 lt drums. The machine can be utilized for direct dispensing onto components, or into cartridges for manual applications. Reliable piston pumps ensure an accurate and consistent processing of materials with high mix ratios or vastly differing viscosities: Ratio range capability 1:1 to 12:1 (depending upon pumps selected) Viscosity acceptance Up to 1,500,000 mPa.s Shot size Available from approx. 11 ml up to 108 ml at 10:1 volumetric ratio Cycle rate Up to 15 shots per minute (depending upon viscosity) Mixing Disposable Static or Rotary/Static Major component drum/pail size Typically approx. 20 lt (5 gal) (depending upon drum dimensions) Minor component reservoir size 18 lt (4,74 gal) stainless steel Minor component drum/pail size approx. 20 lt (5 gal)

TYPICAL APPLICATIONS • Component bonding and sealing • Cartridge/Syringe filling YOUR BENEFITS • Precise metered shot sizes achievable • Reliable and robust operation • Suitable for processing abrasive media (when fitted with hardened parts) • Mixer Valve: Pneumatically operated TSV601 • "Metered" or "Operator Controlled" shot size • Integrated PLC control with HMI operator interface • Manual shot size adjuster with digital reference indicator on PasteShot 20F • Dispense pressure regulator and gauge • Air supply filter/regulator and gauge with connection check unit • Anti-gel automatic purge...