PAR 4CE PAR 4CTE The PAR 4CE & PAR 4CTE from METER MIX® are user-friendly, highly productive dispensing systems for two-part adhesives and resins. Materials can be processed with consistent stability. This is provided by the newly developed in-line drive mechanism (ILD) This ensures advanced flow rate and ratio control characteristics during the metering and mixing process. An added benefit is the electric servo drive speed and shot size control. The machines are optimally suited for different types of dispensing applications. Electronic potting applications are as feasible as casting, moulding or component bonding. Finally, it is possible to interface these machines with automated systems for providing a full or semi-automatic solution. STANDARD FEATURES • Bench top machine with adjustable feet (PAR 4CE) • Floor standing machine on castors for portability (PAR 4CTE) • "Metered Shot" and "Operator Controlled" shot size selection • Service indicator lamp Metering Pumps AVAILABLE OPTIONS • 12 ltr (3.16 gal) capacity reservoir sizes/ 6 ltr (1.58 gal), 12 ltr (3.16 gal) & 30 ltr (7.9 gal) optional on PAR 4CTE • Digitally controlled heating to reservoirs, pumps and hoses • Electric agitation to material reservoirs • Electronic low-level sensing to material reservoirs with visual and audible alarms • Stainless steel wetted parts to protect against corrosion • Hardened parts to protect against abrasion • Nitrogen purge facility to material reservoirs • Vacuum degassing to material reservoirs • Rotary/Static disposable mixing option (electrically driven) • Bulk feed transfer pump facility directly from suppliers containers Controls • Integrated PLC control with colour HMI touchscreen operator interface • "Recipe" function with up to 50 programmable flow rate and shot size parameters • Air supply filter/regulator and gauge with connection check unit. • Main Off/On switch • Emergency Stop & Reset Buttons • Anti-gel automatic purge timer • Shot counter/repeater unit for multiple shot applications • Either foot pedal or hand held trigger start options available • 230V/50Hz or 110V/60Hz AC electric supply + compressed air @ 80 p.s.i. Global Sales and Service Find us near you: www.MeterMixSystems.com/contacts TYPICAL APPLICATIONS • Electronic Potting • Casting • Moulding • Component Bonding • Brush Setting TYPICAL MATERIALS • Polyurethane • Epoxy • Silicone • Methacrylate