PAR 20F PAR 200F Whether you are looking to process one-component silicone, polyurethane, epoxy or grease, the METER MIX® PAR 20F and PAR 200F are economically convincing, highly-efficient 1K dispensing systems. The machines are specially developed for applications such as cartridge/syringe filling, grease dispensing or thermal paste dosing. The PAR 20F & PAR 200F machines incorporate a lift/ram assembly with built-in follower seal plate to enable high-viscosity materials to be processed directly from the suppliers container. In addition, these machines can also be interfaced with automated systems for fully or semi-automatic applications. AVAILABLE OPTIONS • Floor mounted machine (PAR 200F) with castors for portability (PAR 20F) • "Metered" or "Operator Controlled" shot size selection • Service indicator lamp Metering Pumps • Digitally controlled heating to follower plate, pump and hose • Electronic low-level sensing with visual and audible alarms • Stainless steel wetted parts to protect against corrosion • Hardened parts to protect against abrasion • Swiveling boom assembly to support hand held mixer valve TYPICAL APPLICATIONS • Cartridge/Syringe filling • Grease Dosing • Thermal Paste Metering Controls • Integrated PLC control with HMI operator interface • Manual shot size adjuster with digital reference indicator • Dispense pressure regulator and gauge • Air supply filter/regulator and gauge with connection check unit • Main Off/On switch • Emergency Stop & Reset Buttons • Shot counter/repeater unit for multiple shot applications • Either foot pedal or hand held trigger start options available • 230V/50Hz or 110V/60Hz AC electric supply + compressed air @ 80 p.s.i. Global Sales and Service Find us near you: www.MeterMixSystems.com/contacts TYPICAL MATERIALS • Silicone • Polyurethane • Epoxy • Grease