The LiquidFlow 50 is a high-level metering and mixing machine for larger flow production demands. The benefit from this machine is the portable framework with the facility to mount larger material reservoirs and, if requested, a higher flow rate is also achievable. One major advantage of the LiquidFlow 50 is the independent inverter driven motor control for each gear pump, instead of using a lower cost but less efficient gear and toothed belt or chain assembly. This feature allows the operator to easily change the mixing ratio very simply on the built in HMI touchscreen. The machine is mostly used for manual applications, but it can also be interfaced to fully or semi-automatic systems. Typical materials which can be processed are: Ratio range capability 1:1 to 100:1 (depending upon pumps selected) Viscosity acceptance Up to 500,000 mPas (when fitted with transfer pump/accumulator option) Shot size Available from approx. 10ml upwards Flow rate Typically up to approx. 8 lt/min (depending upon viscosity) Mixing Disposable Static or Rotary/Static Reservoir capacity 18 lt (4,74 gal) stainless steel with silica gel moisture protection

• Electronic potting • Larger flow rates are possible • Casting • Can be used for a variety of different applications • Moulding • Continuous flow • Component bonding and sealing • Pulsation-free dispensing • Filter manufacturing • Variable mixing ratio • Quiet operation • Accurate flow-rate control • Metering Pumps: Electric inverter driven gear pumps • Mixer Valve: Pneumatically operated TSV601 "Metered" or "Operator Controlled" shot size selection • Integrated PLC control with HMI touchscreen and variable ratio adjustment • Air supply filter/regulator and gauge with connection check unit •...