WP4C WATER POTENTIAL METER

Product catalog summary

Introduction
The WP4C Water Potential Meter is an instrument designed to measure water potential, a critical factor in the exchange of water between soil, plants, and the atmosphere. This document provides a quick start guide, installation instructions, and maintenance recommendations for the WP4C.

Installation and Preparation
Before using the WP4C, inspect all components to ensure they are in good condition. Choose a stable location with minimal temperature fluctuations to avoid affecting the accuracy of readings. The device should remain on a level surface to prevent contamination of the measurement chamber.

Quick Start Guide

Plug In WP4C: Connect the power cord to the WP4C and an outlet.
Turn the Instrument On: Use the black power switch on the back and allow a 15-minute warm-up period.
Prepare a Sample: Fill a sample cup halfway, clean the surfaces, and place it in the sample drawer.
Take a Reading: Select measurement mode, close the drawer, and twist the knob to the READ position. The WP4C will beep and display results when complete.

Maintenance
Verify the accuracy of the WP4C at least once per shift. If readings are out of specification, clean the instrument thoroughly before recalibrating. Factory calibration is recommended every two years, or annually for high usage instruments.

Support
For assistance, contact the support team via email or phone. North America: [email protected], +1.509.332.5600. Europe: [email protected], +49 89 12 66 52 0.

Catalog excerpts

WATER POTENTIAL METER SUPPORT Have a question or problem? Our support team can help. We manufacture, test, calibrate, and repair every instrument in house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it. Email: [email protected] Phone: +1.509.332.5600 NORTH AMERICA

Open the catalog to page 1

WP4C QUICK START Preparation Inspect and verify that all WP4C components are in good condition. Select a clean, level location where the temperature remains fairly stable. Locations with high temperature variability (e.g., next to air conditioners, heater vents, or open windows) can affect the accuracy of readings. To reduce the chance of the sample material contaminating the measurement chamber, keep the WP4C on a level surface at all times. Do not move the instrument while a sample is loaded into the chamber. Maintenance The accuracy of the WP4C should be verified at least once per shift. If...

Open the catalog to page 2

WATER POTENTIAL METER Have a question or problem? Our support team can help. We manufacture, test, calibrate, and repair every instrument in house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it. NORTH AMERICA Email: [email protected] Phone: +1.509.332.5600

Open the catalog to page 3

All Meter Group catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list